Tracking Oil & Gas Production

Marlee Rose
Jul 23, 2017 · 4 min read

With the amount of paperwork that is required around the lease, it can sometimes seem like pumpers are actually bookkeepers who spend a lot of time outside. Just about everything that is done around a lease ends up getting noted down and recorded somewhere. It’s all important stuff and is used frequently to make important decisions about equipment and production schedules.

While on many leases records are kept on electronically, not every well has a high enough production to warrant those kind of upgrades. Paper records are therefore still fairly common. In either case, the same measurements are required.

Operation Records

Oil production is often where most of the attention goes, and rightfully so; that’s what drives the business and provides the income that pays for everything else. Production records can also be used to diagnose problems, prevent problems before they get serious, and see some issues coming so they can be avoided entirely. Having the production records at hand can often answer a number of on-the-spot questions.

The other records that are kept shouldn’t be discounted, however. A substantial amount of money will be sunk into equipment, maintenance, and labor. Proper records will track all that and highlight where money can be saved and operations streamlined. Some of the other records kept around the lease include:

  • Consumption of chemicals: It’s difficult to express chemical consumption in a simple dollar amount. Chemicals can be added to oil that’s not sold until the next month. That means the cost of chemicals consumed can’t be compared directly to the oil sold. However, comparing to the average daily production gives a workable estimate.
  • Supply expenses: Some companies will allow pumpers to spend a certain amount without needing approval, as long as it’s recorded. For larger purchases, there is usually an approval process that requires paperwork.
  • Time sheets: Recording the hours you worked is obviously important if you want to get paid. Time sheets are kept both for company employees. There is also usually some sort of time keeping paperwork for contract labor. Pumpers working for the company may sometimes need to confirm the amount of work down by contract labor; accuracy is always important.

Other records may include readings for all meters, vehicle mileage and fuel, and details of spills and other problems around the lease.

Production Records

Production amounts will often be sent to the leasing company’s office over the phone or by electronic means. Paper records are also required in many cases. In the past, 7-day production reports were common, but have been replaced by 8-day reports to save on paperwork a bit. Monthly reports are also required to give an overview of production.

Figure 1. An example of the commonly used 8-day report.

The 8-day report is a daily record of production that also shows the results of well tests, lists problems, and other information. It can be helpful to consult it each day to have a reference to compare the day’s production against. The report should always be double checked before it’s submitted, as it’s important that it is accurate. 8-day reports are usually submitted on the 1st, 9th, 17th, and 25th of each month.

Gas production is usually tracked and reported automatically by a meter, so it’s usually not part of the daily report. Gas production will usually be measured as part of the monthly well tests, however, when a chart record may need to be made.

Production is also recorded in the monthly tank battery production record. The total production of oil, water, and gas for the month is listed. It is then divided by the number of days to give a daily average. Comparing daily averages from month to month is a good way to get a sense of production changes over time.

Figure 2. This tank chart is used to convert gauged depth to volume of liquid. The tank is cone-bottomed and contains 3.83 brls of oil.

The tests are done on the same day each month. When a single well feeds to a single battery, one day can be the monthly ‘test day,’ when the well and battery can be tested. These figures are usually recorded on custom tables made for each well. The sheet will usually record the lease, well number, the date, how long the well was produced, and the amount of oil produced. Other details are recorded according to the needs of the particular well. As a rule, it’s better to include too much information than not enough.

As an Operator, would it be helpful to have more timely, descriptive, and accurate production reports from your pumpers in the field?

Pumpers, after finishing your route are you tired of putting together your production reports and sending in those sales and service tickets?

If so, check out GreaseBook to see how hundreds of Operators (and thousands of Pumpers) are using a simple mobile app to help streamline their reporting!

www.greasebook.com

Marlee Rose

Written by

Perpetual student of the oilfield. Proponent of GreaseBook.

Welcome to a place where words matter. On Medium, smart voices and original ideas take center stage - with no ads in sight. Watch
Follow all the topics you care about, and we’ll deliver the best stories for you to your homepage and inbox. Explore
Get unlimited access to the best stories on Medium — and support writers while you’re at it. Just $5/month. Upgrade