Advantages & Applications Of Parker Bushing Pump

At the present time people are always looking for machine that has compact design. The clients look for efficiency and functionality but at the same time they need a design which is suitable for different applications as well. The pumps are composed of two independently controlled over-center piston pumps on a single drive shaft. Being well recognized in the market, pumps are still very relevant in the market because of its compact reservoir.

Delivering exceptional functionality and durability, parker bushing pump has a compact reservoir with a filter and associated valving with typical input speed of 3600 RPM and intermittent pressure 2600 psi. It is the apt machine that fulfills the market demands and applications for industrial and mobile applications.

Industries Which Use The Pump:

1. Agriculture

2. Construction

3. Turf Equipment and Mining

4. Forestry

5. Oil & Gas markets

6. Refuse/dump truck

Applications:

· Construction Equipment

· Turf Care

· Material Handling

· Agricultural

The pump designs offered in the market are advanced thrust plate and seal configuration to optimize performance. The pump offers load sense flow control, high performance and high endurance due to its cast iron construction. You can ensure the product’s quality material by checking the certifications and valve capabilities.

Features:

· Continuous pressures to 245 bar (3000 PSI)

· Balanced Thrust Plates minimize friction and leakage

· Three-piece cast iron construction

· Internal passage constantly lubricates bushings

· Heavy-duty applications

· Single, multiple [up to 6 pumping sections], piggyback and thru-drive assemblies

· Extended studs available for mounting support

Advantages Of Parker Pump

Including of gear pumps, piston and vane pumps, flow dividers hydro-static transmission pumps and intensifiers, it is in great demand for industrial and mobile applications. Even in high temperature and low viscosity conditions, the pump is suitable for applications requiring higher self-priming speeds, also for vehicle operating in high altitudes. It is enabled with three-piece cast iron construction.

With compact design and lesser noise, the pump is easy to install and include standard gauge ports. The parker bushing pump features two intermeshing and precision-ground gear assemblies on the pressure-loaded gear of the pump. These gears are enclosed by die-cast aluminum front cover, back cover and a high-yield, strength aluminum center section.

The three-piece cast iron construction with large area, an advanced thrust plate and seal configuration is the different types of Bushing pumps. These are the machines which can optimize performance even in high temperature and low viscosity conditions. Multiple pumps reduce mounting costs, allow for a small package size and common inlet capabilities.

Gear assemblies consist of one drive gear, shrink-fitted on a precision-ground and polished drive shaft. The pump must be driven in the direction of rotation or else the pressure will blow the shaft seal.

The pumps avail heavy-duty hydraulic application with low-friction bushings. Parker bushing pump provides the strength, efficiency and durability even during the severe operating environments. It can be run into run lines to the hydraulic drive motors. Many of the companies offer parker pump to distribute, build and repair complete hydraulic systems for end users.