How to Install SPD Firmware using Miracle Box
The Miracle Box can be used in place of SPD Flash Tool to flash Spreadtrum-powered devices with official Android firmware. This tool is compatible with other Android devices as well, including those powered by MediaTek.
You can easily gain root access and unlock the bootloader on your phone with the help of Miracle Box. It is a one-stop-shop for flashing software updates, unlocking bootloaders, and restoring EFS.
Here you will learn how to update the stock firmware on your Spreadtrum-based Android device to the most recent version. To update the phone’s official software to the latest version, or “Stock ROM,” is to use the device itself as the source. In most cases, timely OTA updates are applied automatically.
Of course, there are situations in which a device does not get an OTA software update. Any flash tool, including the Miracle Box software, can be used to manually flash the firmware update in such a situation.
For each Android device manufacturer, there is a selection of useful tools. Qualcomm phones use the QPST tool, while Samsung phones use ODIN or the Mi flash tool. No two tools can be used on the same chipset or device.
The Miracle Box is optimised for use with devices powered by MediaTek and Spreadtrum. A firmware file with a BIN extension can be installed with this tool. Keep in mind that the bin file and the Scatter file serve entirely different purposes.
In contrast to Scatter, which consists of both scatter and bin files, the BIN only contains one large file. The scatter file is used by the SP Flash Tool during the firmware installation process. But for Spreadtrum, we require the BIN file.
How to Install Spreadtrum Firmware using Miracle Box
Is your MediaTek device ready to receive the Stock ROM via Miracle Box? If that’s the case, then let’s get started.
Disclaimer
Because this method involves a fair amount of risk, make sure to stick to the instructions that are provided below. We are not responsible for any damage that may occur after or while the device is being flashed. Therefore, you should perform each and every step carefully.
Requirements
- You will need a computer running Windows and a USB cable.
- Make sure that your Spreadtrum device has at least 60 percent of its battery charged.
- Use any Backup app you like to back up the information and settings on your mobile device.
- Spreadtrum USB drivers should be installed on the computer.
For Smartphone and Tablet:
For Feature Phone:
Spreadtrum_Jungo_USB2Serial.zip
Downloads
Steps to Flash Spreadtrum Firmware using Miracle Box
The file containing the Spreadtrum Firmware can be downloaded onto the computer. Launch the Miracle Box Tool application that you downloaded onto your computer. Simply select the SPD option from the menu that is displayed on the tool.
From the right side options, choose the Write option. Tap on the Boot Select drop-down list. Now, simply select your device processor. Here, I’ll select the SPD7731.
Next, click on the Folder button. From the popup window, navigate and open the downloaded firmware file (.bin). Then click Open.
Finally, click on the Start button and connect your phone to the PC using a USB cable.
Be patient and do not remove the USB cable. Once the progress bar reaches 100%, close the Miracle box and disconnect the phone from the computer.
Conclusion
Finally! Using the Miracle Box software in this manner will allow you to successfully install the Spreadtrum Stock Firmware. If you run into any problems while going through the steps, please don’t hesitate to get in touch with us through the comments section. Thank you!