Must Know: Choosing the Right Cogged Belts in India

In order to choose the right and most appropriate cogged belt, it is necessary to understand what a cogged belt means. It is otherwise called as a timing belt, cog belt, toothed belt and a synchronous belt. It is basically a mechanical drive belt that is non- slipping. This belt is made as one flexible belt and it has teeth that are molded onto the inner surface. Also, this belt runs over a matching toothed sprockets and pulleys. When it is tensioned correctly, they will not have any slippage and are also often used to transfer the motion for timing and indexing purposes. More often than not, they are used in the lieu of gears and chains and hence there is very less noise. Also, a bath for lubrication is not completely necessary.

Choosing the belt

Firstly, as a customer you will have to evaluate the entire trade- off between the solution and this can be a very important part of the product’s selection. The features of the product that appear can vary significantly impacting the performance of the unit, cost, and its life. Also, the features of the product can also impact the performance of related drive train components and this can either be in a negative way or a positive way. When you are evaluating the solutions of the application it is best to take the whole picture into consideration in order to determine which of these solutions will meet all the needs that are in the application. All cogged belt manufacturers go through the exact same process.

It is also necessary to check the basic construction of the belt. These belts are basically made of a very flexible polymer that is preferred over the reinforcement of a fabric. Previously, rubber was used over any type of natural textile. However, the developments in the field of material science had recently had a very substantial effect in increasing the lifespan of all the belts available. The cogged belt manufacturers keep this particular aspect in mind each and every time.

The failure modes should also be examined

All these cogged belts have two important modes of failure. These are catastrophic and manual. Both of these can increase their risk over time. One of these failure modes is more of a gradual wear compared to the shape of the tooth. This can eventually lead to a lot of spillage over all the rounded teeth.