Why You Should Start Using a Lens Hood With Your Camera

One of the most common photography accessories is the lens hood — a piece of plastic or metal that attaches to the front of the camera lens and makes it look more professional. This article will discuss Why You Should Start Using a Lens Hood With Your Camera.

Checkout: Best Camera Lens Hood You Need to Buy in 2019

But the lens bumpers are more than appearance. Just to cite a benefit, they can make a big difference in the image quality of an image. This article covers everything you need to know about using lens caps to capture the best possible photos.

Best Camera Lens Hood

Why You Should Use a Lens Hood

A lens protector, also known as a lens shadow, attaches to the front of the lens and prevents stray light from causing reflections in photos. It also helps protect the lens from damage if you come across anything.

This is quite impressive. Simply by attaching a lightweight accessory to the camera lens, you immediately improve image quality and lens durability. This is why most photographers wear lens caps whenever they can.

Below I will cover some more specific information about the benefits of lens hoods, including sample photos taken with and without hood. But that’s most important: use a sunshade whenever possible for durability and flare resistance.

The lens hoods block strong sunlight to improve image quality

This is the original function of a lens hood. A camera lens is made up of a combination of many convex or concave lens elements, with about 10 lens elements used for entry level lenses and about 20 for high grade lenses. When strong light such as sunlight enters the lens during shooting, light is reflected between lens elements, which can result in phenomena that diminish image quality, such as brightness and ghosting.

When you attach a lens hood, it acts as a visor, blocking out strong sunlight that comes in at an angle. A lens hood can cut out harmful light that is not required by the lens, allowing you to take photos that enhance the full capabilities of the lens.EOS 5D Mark III / EF 24–105mm f / 4L / FL: 24mm / f / 4, 1 / 5s., ISO 2500Shot without lens cover.

The circular ghost is visible in the top right corner of the photo, with reflections around it. EOS 5D Mark III / EF 24–105mm f / 4L / FL: 24mm / f / 4, 1/6 sec., ISO 2500Shot with lens cover. Note that the lens hood only cuts light from the side, not the front, as you can tell by its design.

Therefore, depending on the scene, you may not notice any effect when using the lens hood. In addition, recent lenses have a special surface coating, and the lens frame minimizes light reflection in the first place, so there may not be many scenes where image quality is dramatically improved through the use of a lens cap.

It is still a good idea to attach a lens cap. I often find scenes where there is strong sunshine from the setting sun at night, for which I was happy to have my lens hood with me.

The light from street lamps can be surprisingly bright, and it is also in such night landscape scenes — which seem to need no lens blankets — where the lens hoods make their effectiveness felt most intensely. To summarize, attaching a lens hood may not improve image quality in all cases, but it certainly won’t get worse, so I recommend using one.

Lens caps come in 2 shapes

1. Standard Petal Lens Cap

The most commonly used form is the so-called petal lens cap (also known as a flower hood tulip), which has curved notches. This is a highly effective hood that has been trimmed to a size that is just large enough without the hood itself being visible in the frame. An example of a petal cover is the lens hood that is used with the EF-S18–55mm f. / 3.5–5.6 STM IS Kit Lens (EW-63C, sold separately) .EW-63C Lens Cap Cylindrical lens hood, usually used with telephoto or prime lenses.

The cylindrical lens hood is often used with a telephoto lens.

An example of a cylindrical lens hood is one that is used with the EF-S55–250mm f / 4–5.6 IS II kit lens (ET-60, sold separately). Hood Hood ET-60 2. A lens hood Protect lens from dirt and impact With the high functionality offered by lenses these days, probably the biggest reason to wear a lens cap is this — to protect the lens.

Using a lens cap has an effect similar to what you would expect from a protective filter for your lens as it provides additional protection. Physically protects the lens face.

You have had terrible experiences of hitting someone or hitting something while walking your camera. hanging on your shoulder? If you are wearing a lens hood at such times, unless it is an extreme case, the lens face will be protected from any damage.

This is the lens hood that I wear frequently, and as you can see, it has too many thin scratches on it. If it weren’t for the sun visor, the lens itself would have been scratched that way. Keeps fingerprints off your lens! When shooting without a lens cap, you may inadvertently touch the lens face, leaving fingerprints behind.

Have you seen your lenses after shooting to find that the lens face is quite dirty? Also, when photographing children or pets, they may put their hand on the lens or even lick it.

A sunshade can protect your lens from this kind of dirt. Preventing your lens from getting dirty means better image quality! Without the lens hood, you may inadvertently touch the lens face, making it dirty.

While fingerprints may be erased, you may feel more comfortable while recording if it is harder for the lens to get dirty in the first place. A lens hood protects the lens from impacts and dirt that a protective filter alone cannot prevent. 3. A sunshade can make your camera look cooler. The final reason is the fashion sense.

After all, humans sometimes wear hats to look good, don’t they? Simply placing a sunshade can make the camera look cool, and there are people who customize the sunshade by pasting stickers or other decorations. If you adorn your camera with a fashionable strap, it seems a waste to have nothing attached to the lens.

On the left is the appearance of the lens with the lens hood attached during shooting. Changes the look of the lens, making it look cool. On the right, I attach the lens hood when storing the lens. The hood pops out a little laterally, but attaching it upside down makes it less bulky.

More Vlogging Equipment For Beginners

Meet Noor - Blockchain Technology Tips & Guides

Written by

Software Engineer, Blockchain Technology Enthusiast, Blogger, Crypto Lover ❤ #BlockchainTechnology

Welcome to a place where words matter. On Medium, smart voices and original ideas take center stage - with no ads in sight. Watch
Follow all the topics you care about, and we’ll deliver the best stories for you to your homepage and inbox. Explore
Get unlimited access to the best stories on Medium — and support writers while you’re at it. Just $5/month. Upgrade