How to Setup Netgear AC750 WiFi Range Extender

If you’re experiencing slow internet speeds or connectivity issues in certain areas of your home or office, a Netgear AC750 WiFi Range Extender may be the solution you need. This device is designed to extend the coverage of your existing wireless network, providing a stronger and more reliable signal in hard-to-reach areas. In this blog post, we’ll walk you through the Netgear AC750 WiFi Range Extender setup process, so you can enjoy faster and more reliable internet speeds throughout your home or office.

Before You Begin

Before you start setting up your Netgear AC750 WiFi Range Extender, make sure you have the following:

• A WiFi-enabled computer or mobile device.
• Your existing wireless network’s SSID (network name) and password.
• The Netgear AC750 WiFi Range Extender, power adapter, and an Ethernet cable.
• An available power outlet near the area where you want to extend your wireless network.

Step 1: Position the Extender

The first step in setting up your Netgear AC750 WiFi Range Extender is to choose the right location for it. The ideal location is halfway between your existing wireless router and the area where you want to extend your network. Keep in mind that the extender should be placed within the range of your existing wireless network for it to work properly.

Step 2: Connect the Extender

Once you’ve found the ideal location for your Netgear AC750 WiFi Range Extender, plug it into an available power outlet and wait for the power LED to turn on. If the power LED doesn’t turn on, press the power button on the side of the device.

Next, connect your computer or mobile device to the extender’s WiFi network. Look for the network name (SSID) “NETGEAR_EXT” in your device’s list of available wireless networks and connect to it. The default password for the extender’s network is “password.”

Step 3: Connect to the Existing Wireless Network

Open a web browser on your computer or mobile device and type “http://www.mywifiext.net" in the address bar. This will take you to the Netgear AC750 WiFi Range Extender setup page.

Click on the “New Extender Setup” button and follow the on-screen instructions to connect the extender to your existing wireless network. You will be prompted to enter your existing wireless network’s SSID (network name) and password.

If your existing wireless network uses WPA or WPA2 security, you’ll also be prompted to select the encryption type and enter the wireless network’s password.

Step 4: Configure the Extender’s Wireless Settings

Once the Netgear AC750 WiFi Range Extender is connected to your existing wireless network, you can configure its wireless settings to match those of your existing network. This includes choosing a network name (SSID) and password for the extender’s wireless network.

To do this, log in to the extender’s web-based setup page again by typing “http://www.mywifiext.net" in your web browser’s address bar. Click on the “Wireless Settings” option and enter your preferred network name (SSID) and password. Make sure to choose a strong password to protect your network from unauthorized access.

Step 5: Connect Your Devices to the Extender’s Network

Now that you’ve set up your Netgear AC750 WiFi Range Extender, you can connect your devices to its network. Look for the network name (SSID) you chose in the previous step in your device’s list of available wireless networks and connect to it using the password you set.

Conclusion

Setting up a Netgear AC750 WiFi Range Extender is a simple process that can greatly improve your wireless network’s coverage and performance. By following the steps outlined in this blog post Say goodbye to dead zones and slow internet speeds, and enjoy a seamless wireless experience with the Netgear AC750 WiFi Range Extender Setup.