If you’re struggling with weak WiFi signals in your home or office, a Wireless-N WiFi Repeater can help. This device can extend and boost the signal strength of your wireless networks, ensuring better connectivity in hard-to-reach areas. In this guide, we’ll walk you through the setup process, highlight the features and benefits, and provide troubleshooting tips.
Features and Benefits of Wireless-N WiFi Repeater
- Compact and Portable: Ideal for business travelers, easy to carry and set up.
- Compatibility: Supports 2.4GHz WLAN networks and complies with IEEE 802.11n/g/b standards.
- Versatile Operation Modes: Switchable between Repeater and Access Point (AP) modes.
- Secure Connections: Supports WLAN security with WPA, WPA2, WEP (128/64), and WPS.
- High Data Rate: Offers a data transmission rate of up to 300Mbps.
Wireless-N WiFi Repeater Setup Instructions
1. Plug in the Repeater:
Plug your Wireless-N WiFi repeater into a power outlet close to your router. This proximity will make the initial setup process smoother.
2. Connect via Ethernet:
Use an RJ-45 Ethernet cable to connect the repeater to your computer.
3. Configure IP Address:
Adjust your system’s IP settings to match the repeater’s network domain.
IP Address: 192.168.10.x (where x is any number from 2–254)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.1
DNS Server Addresses: Leave blank
4. Access the Setup Page
Open a web browser and enter 192.168.10.1 into the address bar.
Log in with the default username and password, which are usually both “admin”.
5. Configure Repeater Mode
On the setup page, click Setup Wizard on the left sidebar.
Select Wireless Repeater Mode and click Next.
Enter “admin” for both User Name and Password, then click OK.
Click Repeater — OneKey Setting.
Select your desired wireless network and click Next.
If the network has a password, enter it into the Pre-Shared Key field.
Click Apply and Reboot, then OK.
After successful configuration, the repeater will show “Connected” under its status.
6. Configure Access Point (AP) Mode
In the main menu, click Setup Wizard and select Standard Wireless AP Mode.
Click AP — OneKey Setting.
The device will automatically configure to AP mode.
Click Security on the left sidebar, type in your password in the Pre-Shared Key field, and click Apply Changes.
Connect the repeater to your router with an RJ-45 cable.
6. Basic Settings
In the main menu, click Basic Settings under the Wireless section.
Adjust the basic settings as needed and click Apply Changes.
7. Wireless Protected Setup (WPS)
In the main menu, click WPS under the Wireless section.
Click Start PBC to enable the WPS function.
Wireless-N WiFi Repeater Troubleshooting Tips
Optimal Placement: Avoid placing the repeater near thick walls or large metal objects to prevent signal interference.
Reboot if Needed: If you encounter issues, reset the repeater and repeat the setup process.
Check Connections: Ensure all cables are securely connected and the repeater is within range of your main router.
Technical Support: Wireless-N WiFi Repeater Setup
For any issues or questions, Call our Toll-free 1–844–765–4831.
By following these Wireless-N WiFi Repeater Setup Instructions, you can enjoy a stronger and more reliable WiFi connection throughout your home or office. Happy surfing!