Eero Stuck on Registering? Here’s How to Fix It!

4 min readMay 21, 2023

Mesh Wi-Fi technology is a speciality of Eero. In place of standard routers, Wi-Fi extenders, and gateways, the device is used. When connected directly to a router or modem, the Eero router device acts as the primary gateway.

Connecting more Eero devices or beacons will increase the coverage area. You may join all of your devices to a single wireless network by creating a single SSID.

Utilising the Eero device has the benefit of a quick and simple setup. During the setup procedure, you must create an account and establish the necessary connections.

This article is for you if you are working on the Eero setup and your Eero is stuck on registration.

You will discover the reasons why your Eero setup is stopped on registration in this article, along with advice on how to quickly investigate and resolve the setup problem.

Understanding Eero’s “Registering” Process:

When Eero gets stuck on registering, it means that the device is unable to complete the setup process and establish a connection with your network.

This can happen due to various reasons, such as network issues, firmware glitches, or hardware malfunctions. Understanding these factors will help us navigate the troubleshooting steps effectively.

How much time should Eero need to register?

The Eero signup procedure is finished in 3 to 5 minutes. However, the modem normally determines how long it takes. If the registration procedure takes more than 15 minutes, there is probably a problem.

The troubleshooting advice in this article will be helpful in this situation. Let’s first investigate why your setup is unable to register.

Why Is My Eero Setup Locked Up During Registration?

Your Eero may be unable to register for a number of reasons. For instance, there can be a problem with the Eero app or a problem with the internet connection. Listed below is a breakdown of potential problems, whatever one it is:

Internet Connection Error: It is recommended that your device have a data connection when going through the initial setup procedure. This is due to the possibility that briefly losing Wi-Fi connectivity may occur during the setup procedure.
Problem With The Eero App: The Eero app can also be the source of a problem. The software may have a small issue, or maybe you are using an outdated version that needs to be updated.
Minimal Device Bugs: Your device’s bugs may interfere with the setup procedure. For instance, the setup procedure may be impacted if you haven’t updated the firmware on your device in some time.
Off Bluetooth: Additionally, it’s possible that your device’s Bluetooth settings are hidden or turned off. To link your Eero with your account, you must have Bluetooth enabled on your device.

Troubleshooting Steps:

To resolve the issue of Eero being stuck on registering, follow these steps:

Power Cycle:

Unplug all Eero devices from the power source.
Wait for a minute to allow them to fully power down.
Plug the devices back in and wait for them to reboot.
Check if the registration process resumes successfully.

Check Internet Connection:

Verify that your modem is connected to the internet and functioning properly.
Ensure your Eero is properly connected to the modem via Ethernet or through the designated setup process.
Test your internet connection on other devices to rule out any connectivity issues.

Reset Eero:

Perform a factory reset on your Eero devices. This can usually be done by holding the reset button for about 10 seconds.
Follow the instructions provided by Eero for resetting the devices.
After the reset, attempt to register them again.

Update Eero Firmware:

Check for any available firmware updates for your Eero devices.
Open the Eero mobile app and navigate to the settings section to check for updates.
If an update is available, follow the instructions to install it.
Retry the registering process after the firmware update.

Contact Eero Support:

If none of the previous steps resolves the issue, it’s time to reach out to Eero’s customer support.
Provide them with relevant details about your setup, the steps you’ve taken, and any error messages received.
Eero’s support team will guide you through further troubleshooting or discuss potential replacement options.

Preventive Measures:

To minimize the chances of encountering registration issues in the future, consider the following preventive measures:

Regularly update your Eero devices to the latest firmware version to ensure optimal performance and bug fixes.
Ensure your internet connection is stable and reliable, as network interruptions can disrupt the setup process.
Avoid making frequent changes to your network configuration unless necessary.
Keep your Eero devices in a well-ventilated area to prevent overheating, as excessive heat can lead to hardware issues.

Conclusion

Experiencing an Eero device stuck on registering can be frustrating, but with the troubleshooting steps outlined in this article, you can effectively resolve the issue.

By power cycling, checking the internet connection, resetting Eero, updating firmware, and seeking support when needed, you can successfully complete the registration process and enjoy uninterrupted connectivity with your Eero mesh Wi-Fi system.

[rank_math_rich_snippet id=”s-9f727d8b-48bc-4d20–8c30-f36d96562eaa”]