How to turn off bridge mode on orbi router?

Using the Orbi web interface, you can change the router’s settings to disable bridge mode on your Orbi router. On your Orbi router, take the following precise actions to turn off bridge mode:

• Make sure your computer, tablet, or smartphone is either wired or wirelessly linked to the Orbi router via an Ethernet cable.
• Launch a web browser and type “192.168.1.1” or “orbilogin.com” into the address box.
• Enter your password and admin username to log in.
• The default values are often “password” for the password and “admin” for the username, if you haven’t modified them.
• Click the “Advanced” tab in the main menu after logging in. Open the “Advanced Setup” section from the sidebar on the left.
• Press the “Router/AP Mode” button in the Advanced Setup area.
• The option to enable or disable bridge mode will be visible to you.
• Click the “Disable Bridge Mode” option.
• Make sure “Router Mode” is selected on the router rather than “AP Mode.”
• To save the changes after choosing to disable bridge mode, click the “Apply” button.
• The router may automatically reboot and take a few moments to update the settings.
• Check that everything is functioning properly with your internet connection after the router has rebooted.
• Make sure that the modifications are correctly implemented by testing with numerous devices connecting to the internet.
• Making sure the firmware on your Orbi router is up to date is a smart habit.
• Go to “Administration” on the Orbi web interface and choose “Firmware Update.”
• Look for updates that are available, then install them if needed.
• Now that the router is in regular mode, you may need to adjust any customised network settings you made when it was in bridge mode.
• Make sure your Wi-Fi SSID, password, and DHCP settings are configured to your liking. After turning off bridge mode, try restarting your Orbi router and modem to see if it resolves any problems.

Examine the network configurations on every device that is linked to make sure there are no conflicts with IP addresses. If issues continue, reset the Orbi router to its factory settings and reinstall it. Visit our website to know more about orbi bridge mode.