Pankaj Saharia Shrewsbury

Pankaj Saharia from Shrewsbury Discusses the Seven Wonders

Pankaj Saharia from Shrewsbury, Massachusetts, a proud member of the American Society of Civil Engineers (ASCE), follows their publications closely. The Seven Wonders of the Ancient World, which includes places such as the Temple of Zeus and the Hanging Gardens of Babylon, are well known and appreciated throughout history. In the last century, the ASCE has sought to identify a contemporary counterpart to these wonders, thus creating their own list. The Seven Wonders of the Modern World were therefore submitted as great feats in the realm of civil and structural engineering.

Three of the Seven Wonders of the Modern World were constructed in North America. These include the Empire State Building in New York City, the CN Tower in Ontario, and the Golden Gate Bridge in San Francisco. These three modern engineering masterpieces were built in 1931, 1976, and 1933 respectively. In Central and South America, two more on the list are found. The first is the Panama Canal in Panama, which was constructed in 1904. The Itaipu Dam which runs through Brazil and Paraguay marks the South American addition to the list. This 79.19-mile dam began construction in 1975.

The last two modern wonders on the list reside in Europe. The North Sea protection works, which includes the Delta Works and the Zuiderzee Works are found in the Netherlands. These projects were started in the early 1900s. The last member of the list is the Channel Tunnel that runs from France to the United Kingdom, a marvel that Pankaj Saharia Shrewsbury, Massachusetts truly appreciates.

Pankaj Saharia Shrewsbury — Bridge Designs

Pankaj Saharia is an experienced structural engineer who makes his home in Shrewsbury, Massachusetts. Since earning his Masters degree in civil engineering from the University of Detroit in 1992, he has been involved in numerous engineering projects, including the design of bridges throughout Massachusetts.

His bridge designs range from pedestrian bridges for railroad bridges. He was the structural engineer who performed the structural design of the superstructure and substructure of the Bradford Railroad Bridge in Westerly, Rhode Island. “I carried out bridge geometry calculations including top of form elevations, bridge seat elevations over [the] abutment, [and] drafted engineering drawings in AudoCAD.” His work was done under the supervision of a senior professional engineer.

There are a number of differences between the designs of highway bridges and railroad bridges. The most obvious difference is that railroad bridges must bear a tremendous amount of weight, far more than do highway bridges. Since the majority of railroad routes in the United States are well-established, most new railroad bridges are built on existing routes. For railroad bridges, a design known as a simple span structure is preferred. In bridge design, crucial factors are constructability and maintainability. This is because interruptions to service are considered much more critical to railroads than they are for highway agencies.

Pankaj Saharia of Shrewsbury has been a member of the American Society of Civil Engineers for more than twenty-five years. He is also a member of the United States Green Building Council, which sets standards for environmentally friendly building construction.


Pankaj Saharia of Shrewsbury — Tips For Prospective Engineers

Pankaj Saharia, who currently works in Shrewsbury, recognizes that the engineering industry has given him a lot during the course of his life and he is always happy to discuss his work with people who are interested in studying the discipline. He has developed the following tips for those who are considering a career as an engineer.

Build a Portfolio

You should take an interest in every single opportunity that you have to participate in a design project, as this will not only offer you the chance to interact with fellow engineers and students, but also ensures that you begin developing a portfolio as quickly as possible. This is particularly important when you are studying for your degree, as working on projects outside your curriculum will give you something unique to show to potential employers.

Choose a Discipline

There are many different disciplines that fall under the banner of engineering, so it is important to understand the one that interests you the most. This will allow you to focus your learning experience, plus it will also give you a little more time to change course if you find your chosen discipline is not right for you.


Pankaj Saharia spends a lot of time away from Shrewsbury so that he can network with potential clients and fellow professionals. This is a habit that prospective engineers should start early, so make sure to attend any event that you can relating to the subject, in addition to making use of social networks like LinkedIn.

Pankaj Saharia of Shrewsbury — Problem Solve like an Engineer

Engineers often face a wide array of challenges that must be overcome and problems that must be solved. Pankaj Saharia is a structural and bridge engineer in Shrewsbury, Massachusetts who has spent years developing his problem solving skills. He understands that problem solving is a key skill for professional engineers to develop for several reasons.

Engineering involves generating designs for a variety of systems and objects. Engineers are responsible for taking on the challenge of designing systems that will better society. The sole nature of their job is problem solving. These scientists find new ways to make life more convenient. For example, water resource engineers are challenged with finding new ways to move water through urban areas. Electrical engineers are challenged with finding more efficient lighting methods, and structural engineers are challenged with creating enduring buildings. These professionals problem solve every day and during every step of their professional process.

Structural engineers focus on creating buildings that can bear loads and stand up to natural disasters. It is important for these engineers to have problem solving skills, because issues are inevitable during the design process. New systems and processes will fail multiple times before the engineer discovers a successful process. These engineers must be able to analyze their failures in order to figure out how to succeed. If you are interested in becoming an engineer, you should first develop your problem solving skills.

Pankaj Saharia Shrewsbury is a skilled engineer in Shrewsbury, MA who is able to analyze every situation from all possible angles. This allows him to be a skilled problem solver and a successful structural engineer.

Pankaj Saharia of Shrewsbury — Tips For Successful Project Management

Having established himself as a talented and successful structural engineer, Pankaj Saharia Shrewsbury has moved into a project management role in recent years. He currently maintains a team of professionals in Shrewsbury, ensuring that projects are completed on time, in budget and to the client’s satisfaction. He has the following pointers for people who are just moving into a similar role.

Pick Wisely

Each member of your team will have specific strengths and weaknesses, so it is important to consider these when making your selections. You need to create a team of individuals that complement each other well, while also making sure that the team as a whole has all of the skills necessary to deliver the project.

Set Goals

It is vital that your project team understands the aim of the project and their specific role in order to get the best out of them. As such, you should make the effort to communicate project goals right at the start, reiterating them as needed. Create a project roadmap, as this will allow you to handle any issues that arise as quickly as possible.

Be Available

A lot of projects fail because of a lack of communication between the project team and management, so it is crucial that your team is comfortable communicating with you. Pankaj Saharia Shrewsbury, who works with his project team in Shrewsbury, recommends arranging regular meetings that allow everybody in the team to provide updates and voice concerns, in addition to maintaining a positive attitude that will help to keep everybody motivated.

Pankaj Saharia of Shrewsbury — 3 Ways Traveling Can Improve your Professional Life

Traveling to a new city, or a new country can be fun as well as an educational experience. Pankaj Saharia is a structural engineer in Shrewsbury, Massachusetts and is passionate about international travel. He has visited several countries in Europe and takes every available opportunity to travel. Traveling inspires him in his professional life as well as his personal life. He is a better engineer because he takes the time to travel and visit new places.

A structural engineer who focuses on bridges can benefit greatly from traveling. Cities all over the world have bridges, and many use different styles of bridges. Travelling can help these professionals learn new building methods and they may be inspired to adopt these methods in their own projects.

Travelling involves meeting people from all over the world. Engineers, as well as other professionals, often need to interact with a wide variety of personalities. Traveling and socializing with people in different countries may help professionals develop their social skills.

Travelling exposes people to new cultures and societies. This exposure will make professionals well rounded, and will help them have a better understanding of the world. Any professional can benefit by have a variety of cultural experiences.

Seeing new cities and meeting new people is an important part of life. Travelling helps people grow, and with that growth there is the potential for career development. Pankaj Saharia lives and works in Shrewsbury, Massachusetts but takes every opportunity to travel. His travels along with his ambition have helped him develop a prosperous career.

Pankaj Saharia of Shrewsbury — Ways to Stay on the Cutting Edge

A large part of Pankaj Saharia’s success as a structural engineer comes down to his ability to stay on the cutting edge of the field. This allows him to offer clients in Shrewsbury and beyond the most modern and innovative design concepts for new structures. He has developed the following tips for people who are struggling to stay at the top of their sector.


You should always be making the effort to network with people in your field, as this offers you the opportunity to discuss what they are currently doing. By listening to your peers, you will often hear of new ideas and developments as soon as they have become relevant, allowing you to incorporate them into your own business strategy as needed or providing the grounds for further research.

Understand Technology

Technology has become increasingly important in the modern workplace, so it is important to understand the technology that is available to you and how it is evolving. Using older tech can lead to your work becoming less efficient, or even outdated. By staying up to date with all of the tools that are available to you, it is easier to stay at the cutting edge of your industry.

Read Constantly

No matter how avidly you network, it is improbable that the peers you meet will be able to expose you to everything in your industry. This is why Pankaj Saharia, of Shrewsbury, always recommends reading as much as you can, as this will allow you to educate yourself further using sources that are not immediately available to you.

Pankaj Saharia — Golf Tips, Play to Your Strengths

Pankaj Saharia is a professional structural engineer with many accomplishments under his belt. In the course of twenty-five years he has received a Master’s Degree in Structural Engineering, become a member of the American Society of Civil Engineers, and as a member of the United States Green Building Council.

He has also received an accolade for his outstanding contributions to a project titled the “Overhead Coverage System.” This system was designed in Iraq for the Transatlantic Program Center. Pankaj’s contributions earned him an accolade from the US Army Corps of Engineers. When he is not on the job however, he enjoys winding down with a nice game of golf.

He is a man of peace. That is why golf is a good fit for him, as the sport usually allows for ample time with quiet thoughts. He says that he loves golf so much that he could spend an entire day on the course without regrets.

For people like Pankaj Saharia who want to become better at golf, it helps to take a look at the professionals. Golfing legend Jack Nicklaus, for instance, wrote an article for titled “How to Make a Hole Play to Your Strength.” There he suggests “to design into nearly every par 4 the following situation: To get in position for an easy par, the golfer must hit at least one good shot.”

Pankaj Saharia Shrewsbury is a Project Manager who enjoys a number of different hobbies. His interests include traveling, World Geography, and World History.



Pankaj Saharia of Shrewsbury — What is Seismic Analysis?

Pankaj Saharia is a structural engineer who focuses on bridge engineering in Shrewsbury, Massachusetts. Whenever he designs a new bridge, safety is at the forefront of his mind. His goal is to create bridges that will safely bear their loads for generations. In order to achieve this, he uses seismic analyses during the design process.

A seismic analysis is a part of the structural analysis process. It calculates a building or structures response to earthquakes. Earthquakes can occur anywhere there is a fault line, and can have a devastating impact on structures and buildings. Structural engineers work hard to minimalize this impact and to create buildings that will survive an earthquake.

Seismic analyses were first adopted in 1927 and were added to the Uniform Building Code (UBC), which was primarily used on the west coast of the United States of America. Studies surrounding buildings responses to earthquakes continued until the early 1950s when a joint committee of the San Francisco chapter of the American Society of Civil Engineers and the Structural Engineers Association of Northern California made a monumental breakthrough. They began to use the building period to determine the lateral forces, and were able to better hypothesize on how the dynamic properties of a structure affected the loads generated during an earthquake.

Seismic research has caused the development of building codes throughout the United States. Structural engineers, such as Pankaj Saharia Shrewsbury, use seismic analyses to design buildings that will comply with local building codes and withstand earthquakes.

Pankaj Saharia of Shrewsbury — Engineering and Fastening Systems

Pankaj Saharia has many traits that distinguish him from other structural engineers. He comes from a small state called Assam, located in the Northeast part of India. He came to the US in order to pursue a Master’s Degree in Structural Engineering. From there he joined the American Society of Civil Engineers, a group he has been a member of for over twenty-five years. For his skills, knowledge, and dedication, he received an accolade for outstanding contributions from the US Army Corps of Engineers.

One of his goals as a structural engineer is to help make the world a more beautiful place. His mission includes helping those less fortunate, and providing economic and environmentally friendly structures. This he believes is a way that the world can be improved through engineering.

Engineers like Pankaj Saharia of Shrewsbury had to learn from mistakes to get better. Thankfully, you can use the experience of other engineers to avoid rookie mistakes. One common mistake engineers make is not training operators on fastening systems. That is why’s article “Ten Tips to Secure Good Design” suggests, “Operators must be trained on the fastening system. This is another obvious requirement that is overlooked. ANSI A10.3 Safety Requirements for Powder-Actuated Fastening Systems should be included in the Project Specifications and Structural General Notes where these mechanical fastening systems are used.”

Pankaj Saharia is a structural engineer who also enjoys playing golf. When not at work he also likes to study World History, Geography, and is passionate about helping the needy.

Source: ​

Pankaj Saharia Shrewsbury — 3 Tips for a Successful Bridge Design

Pankaj Saharia is a Structural Engineer who lives and works in Shrewsbury, Massachusetts. He specializes in bridge engineering and is a successful project manager. He has over two decades of experience and is highly knowledgeable in his field. He loves contributing to various communities and making locations more livable for their residents. He is dedicated to his career and has spent years developing his skills in bridge design. These engineers are usually structural engineers who have studied bridge design as a specialization.

There are several vital steps involved in bridge design and engineering. Every bridge engineer keeps both aesthetics and safety in mind creating their designs. Veteran bridge designers understand that a bridge should be as efficient, economical, and elegant as possible while keeping safety as the number one factor. 
A great tip for rookie bridge designers is to keep efficiency in mind, while developing a design. Bridges are meant for transportation and to make transportation more convenient. Therefore, they should be as efficient as possible, and allow commuters a greater convenience than if the bridge did not exist. In order to make a bridge more efficient, engineers consider the width of the bridge as well as the length of the bridge. It is important to consider what load the bridge will be bearing, and how many people or how much cargo will need to cross the bridge, and how frequently the bride will be in use.

A second tip for new bridge engineers is to make the bridge as economical as possible. Bridges throughout the United States are often government funded and meant for public interest. Therefore, it is important to build a high quality bridge at a fairly low cost. This can be accomplished by figuring out where you should place the bulk of your funding for your project. For example, if you have a small budget for a bridge project, invest the majority of the funds into the materials and labor involved with the bridge, and do not invest much in the aesthetics of the bridge. It is essential to compare what your bridge design needs versus the amount of funding you have.

A third tip for young structural engineers is to always strive to create an elegant and aesthetically pleasing bridge, but never at the expense of the bridges safety. Safety should always be first in bridge designs. A talented engineer and bridge designer is often able to walk the line between beauty and safety. This engineer is able to design a stunning bridge that will endure countless years. This should be every bridge designer’s goal, to create an artful bridge that is secure and safe. Pankaj Saharia is a structural engineer in Shrewsbury, Massachusetts who loves working on beautiful buildings and bridges that will last several lifetimes.

Pankaj Saharia of Shrewsbury — Be a Better Engineer, Understand Specific Connections

Pankaj Saharia is a structural engineer with a long list of accomplishments. He has been a part of the American Society of Civil Engineers for over twenty-five years. This network of dedicated professionals has helped him grow in the field and earn accolades for his skill.

One such accolade that he received was for outstanding contributions to a military program called the “Overhead Coverage System.” This system was designed for use in Iraq for the Transatlantic Program Center. The project was so successful that Pankaj received an award from the US Army Corps of Engineers.

He is one of those individuals who always puts the needs of others before his own. He is a community supporter who has even announced a scholarship program for high school seniors, one that was made in memory of his loving aunt.

Being a good structural engineer like Pankaj Saharia of Shrewsbury doesn’t happen overnight. It requires education and experience. Among the problems engineers face in the field are inconsistencies between manufacturing specifications for connections, and what happens in the field. In an article from titled, “Ten Tips to Secure Good Design,” they suggest, “Putting oneself ‘in the boots of the installer’ can help guide decisions on connections.”

Pankaj Saharia Shrewsbury knows that what happens in the field isn’t always the same as what the papers suggest. That is why engineers thrive when they are adaptive and do thorough research. Pankaj himself believes that passion and in-depth knowledge lead to structural engineering success.

Source: ​

Pankaj Saharia — Avoid Common Engineering Mistakes, Specify Methods

As an experienced structural engineer, Pankaj Saharia of Shrewsbury is a problem solver. He has been working in his field for over twenty-five years. It all started when he came to the United States in the 90s from a small state called Assam, which is located in the Northeast part of India.

He received his Bachelor’s degree in Civil Engineering from Gauhati University in India, and his Master’s Degree from the University of Detroit. He began his career in structural engineering and has also earned the title of project manager, leading a team of professionals to get any job done.

It is one of Pankaj’s goals in life to try and make the world as peaceful and harmonious as possible. He believes that this can be achieved through innovation and engineering. That is why he works hard to help make the world beautiful and habitable for everyone through sound engineering.

Being an accomplished engineer like Pankaj Saharia requires considerable time and effort. There are many resources out there to help you grow and improve. One good source for engineering information is There, an article called “Ten Tips to Secure Good Design” gives sound advice for avoiding common engineering mistakes. One tip the article gives is, “It’s common to let the contractor decide on the means and methods for the steel deck installation as long as the project submittal requirements are satisfied and all building code evaluations and approvals are in place.”

Doing the appropriate amount of research is how engineers like Pankaj Saharia of Shrewsbury have thrived in their profession.

Pankaj Saharia of Shrewsbury — Giving to Those in Need

Pankaj Saharia is compassionate and is always trying to find a way to give to those who are in need. He believes in making the world a better place, and contributing to it in every way possible. It is important to give back to those in your community, and to help the people who have fallen into bad luck. A little help from one person can make the life of another better. There are several ways to help those in need, you can donate to a charity, or volunteer your time at a local organization.

Donating to charity can help make other people’s lives better. If you are thinking about giving back to the community, spend some time researching charities. It is important that you choose a charity that is offering services you believe in. Unfortunately, there are a lot of organized charities that only give a fraction of your donation to a cause. Make sure you research the organization fully, so that you can ensure that the majority of your donation is reaching those you want to help. A great way to find good charities is to go through local organizations such as nonprofits, outreach program, and religious organizations. Each of these should be able to provide you with a wide list of charitable programs and organizations.

If you want to do more than send money, you can volunteer your time. Soup kitchens, outreach programs, and other organizations are always looking for volunteers. If you have a free day a week, spend part of that day giving back to your community and those in need. Pankaj Saharia Shrewsbury believes in helping others and doing all that he can to make the world livelier.

Pankaj Saharia of Shrewsbury — How to Relax with Music

Any adult knows the stresses of life and work. Going into an office and working on challenging projects is rewarding, but stressful. Pankaj Saharia of Shrewsbury, Massachusetts enjoys relaxing with music. Playing his guitar and listening to instrumental music helps him unwind after his long day. After listening to music, or playing his guitar, he feels refreshed and ready to take on the next challenge. Music is a great relaxer and can help anyone rest or relieve tension.

After a long week at work, sitting back with some music is a great way to relax. The music will calm your mind and help you forget about the stresses in the office. No matter what your favorite type of music is, spending an hour just listening will refresh you and prepare you for the next week at work.

Another great way to relax with music, is to go and see live music with some friend. It will get you out of the office, and the house. You will be in a casual environment surrounded by people who love and appreciate the music you are all listening to. This is a good way to reconnect with friends and family and enjoy some fantastic music.

A great way to relieve tension is to learn to play an instrument. This hobby will provide you with a challenge that is not work related. You will be able to make achievements, and gain another skill. Playing an instrument also offers you a way to be creative. Pankaj Saharia of Shrewsbury loves music, and often dabbles in instrumental music.

Pankaj Saharia of Shrewsbury -What is the United States Green Building Council?

Pankaj Saharia of Shrewsbury, Massachusetts has been a member of the United States Green Building Council (USGBC) for more than 10 years. This council is made of up tens of thousands of chapters, member organizations, students, and community volunteers. According to their website, their mission statement is “to transform the way buildings and communities are designed, built and operated, enabling an environmentally and social responsible, healthy, and prosperous environment that improves the quality of life.”

Members of this council are invested in preserving the environment, while still advancing society through building and expansion. The council was founded in 1993 by three men who are devoted to promoting sustainability in the building and construction industry. That year, the council was made up of approximately 60 firms and a few nonprofit organizations. Today, the council consists of builders, corporations, nonprofits, environmentalists, elected officials, citizens, teachers, and students. It has chapters all across the United States and a wealth of members who are dedicated to sustainability.

They have several programs that focus on transforming the building industry. They developed the Leadership in Energy and Environmental Design (LEED) program. This program offers professionals credentials that demonstrate their knowledge in sustainable design and construction. The USGBC also hosts the Greenbuild International Conference and Expo. This is the world’s largest conference dedicated to green building. It is an annual event and provides professionals with the newest research in green building.

The USGBC is dedicated to educating people on how to build green and the importance of building green. They have training programs for professionals from all sectors and a wide variety of seminars. Pankaj Saharia Shrewsbury is dedicated to green building.

Pankaj Saharia of Shrewsbury — Everything You Need to Know About Civil Engineering

Pankaj Saharia of Shrewsbury, Massachusetts earned a Master of Science in Civil Engineering. This field deals with the built environment and can encompass several different disciplines. There are multiple disciplines within civil engineering, and each one deals with structure in an urban, or populated setting. These engineers deal with the design, construction, and maintenance of the physical and naturally built environment. These sub disciplines include, water resource engineering, environmental engineering, transportation engineering, and more.

Water resource, or hydraulic, engineering deals with the conveyance and flow of fluids, principally water. Engineers who specialize in this field deal with dams, channels, canals, bridges, and levees.

They are responsible for the design, construction, and maintenance of these structures. These engineers apply fluid mechanics principles to solve issues surrounding the collection, storage, transportation, regulation, control, use, and measurement of water. They use these principles to control the large bodies of water that surround towns, and to find new ways to bring water to cities.

Environmental engineering is another sub discipline of civil engineering. This field is important to the health of the environment. These scientists deal with chemical, biological, and thermal wastes. They find ways to purify water and air, and to rebuild contaminated sites.

This discipline covers pollutant transport and hazardous waste management. They use principles of green engineering and industrial ecology to help keep the environment clean and to avoid damage from pollutants.

Transportation engineering focuses on moving people and goods. This discipline strives to develop modes of transportation that are safe, efficient, and in a way that is conducive to a community. These modes of transportation include streets, canals, rail systems, airports, highways, and mass transit.

Pankaj Saharia of Shrewsbury is educated in civil engineering. He specializes in structural engineering, which is another sub discipline of civil engineering.

Originally published at