A Complete Linksys Range Extender Setup Guide
If you are seeking help to remove dead zones in your area, home, or workplace, then we would say that you have arrived at the right place. Yes, we at extenderlinksyscom.us provides you a complete setup guide to fight against poor connectivity and no signal zones areas. There are many ways to get high range of wireless signals all over the house. So, here in this post, we will guide you step by step to configure your ‘extender.linksys’ manually and instantly.
It may also interest you to know that WiFi signals are the radio waves which use to get refracted from roof, walls, and windows that tend to poor WiFi signal range. Also, remember that placement of your router can resolve the issue related to dead zones. So, to get rid of such issues, place your router at the central location of the house away from cordless phones, Bluetooth speakers, metal appliances, and electronic gadgets.
Note: A router alone is not enough to spread internet range to far corners of the house. The permanent solution for this situation would be the Linksys range extender. Just switch to this device and turn your dead zones into fun zones.
How Does a Linksys Range Extender Works?
Well, all the Linksys range extender works with the same updated version of technology. These wireless range extenders enhanced the range of your existing router and spread it all over the house even at dead zones and poor connectivity areas. Such smart devices repeat the boosted WiFi signal range to the far corners and that is why they are perfect to be called as Linksys Range Extender.
Configuration of a Linksys Range Extender
Remember, that in most range extenders you will get the power LED lights in front which gives you the information about its set up and power. If the power lights on your range extender are in white color, it means that it is power on. White color on your range extender also indicates ‘rest on factory settings’ or ‘up gradation of the firmware’. Solid lights mean that you can use your range extender and access extender.linksys.com.
If you are facing any issues with your Linksys range extender or fail to see any LED lights on it, then we would insist you that do call our tech support team immediately on toll-free number 1–844–726–2255 and get instant solution regarding the same or any.
How to Install a Linksys WiFi Range Extender
First of all, it is important to understand the installation and configuration of a Linksys range extender before you set it up.
1. The first thing that you have to keep in mind is that you have to locate the antennas of your Linksys range extender in a straight vertical position.
2. Second, choose an appropriate location to place your range extender. The best spot to place it would be in the middle of your house or floor.
3. As soon as you have done with the placement process, plug in your range extender into an electrical outlet and after that, connect a computer with it.
4. Now, what you have to do, open an internet browser and in the address bar type http://extender.linksys.com.
How to Set up your Linksys Range Extender
Trust us, if you stick on this post the setup of your range extender would be much easier. In order to set up your Linksys range extender, you need to get the default Linksys Extender Login. Once you have connected with the Linksys WiFi range extender you need to access the web-based setup page by using the default login credentials.
Follow Some Rose-Petal Steps Given Below
· Plug in your range extender into a power socket.
· After that, connect your PC with the help of an Ethernet cable.
· Next, in the address bar of an internet browser type the default IP address of the range extender.
· Login into the setup page of your ‘Extender Linksys’ and consider adding the name of it.
· Now, what you have to do, add the same network name (SSID) from your access point or the router.
· Click on the ‘Save’ button.
In case, you have any difficulty in setting up your range extender; consider keeping it on ‘factory default settings’.
How to Set your Linksys Range Extender to Factory Default Settings
1. Disconnect all the wires that are used for connecting range extender with computer and the router.
2. Unplug your range extender and plug it into a different room.
3. After that, with the help of paper clip, press the reset button on your Linksys range extender for 5–10 seconds and after that release it.
Note: Before going with the reset process, make sure that you create a backup of the device’s configuration settings and restore them.