PBJ Painting | An Overview On Pbj Painting

Although Pbj Painting I feel forced to warn towards painting the exterior of a house or other framework in the fall. You might say “Why not? The climate is great for working external, not hot and humid. It’s a great time to paint external.” Although it is relaxed for the painter, it is not relaxed for the paint. A lot of external artwork is done in the fall, and this is a bad blunder.

In my successful house artwork business that I began in July 1989, I would not plan any outside painting job. Some of my clients did not like this, and they hired one more painter. I took quite a few years, but my customers soon discovered out that I was sensible in my decision not to paint external.
Within a year or two, buildings painted in the fall began to show signs of paint failing. There was breaking, peeling and cracking off of paint, and the paint job required repair or painting within a year or two. There is a medical reason for this failing.

The scientific purpose is in the drying out and connection of paint. Two things occur during this process. The automobile (either latex or oil) dries up as the paint dries. The 2nd thing that occurs is that there is a substance reaction within the colour. Both of these methods have to happen in a relatively warm atmosphere. Paint cans will warn you not to apply paint when the heat range is below 50 or 55 degrees. Many fall days, it may be 70 in the day time, but go down as low as 28 over night. The fresh paint is still planning through the chemical reaction essential for proper adherence of the paint. This cannot occur in the lower conditions, thus the paint does not adhere to the exterior and peels off within a year or two.

There are some other factors not to paint external. Pbj Painting tell Certain types of windows need putty (glazing compound.) Putty requires a very long time to dry, especially since a large amount of putty has to be used, making it thick. Putty also needs hotter conditions to dry and cure properly, otherwise it will crack and have to be taken out and replaced. For a good, tight paint job, you will also need to use a lot of latex caulk. Caulk also needs warmer conditions to dry and cure. Primers need some warmth to dry.

By the way, fall is a ideal time for inside painting. Look for my upcoming article on this.