Here’s How to Fix a Broken iPhone X Display

One of the most common problems faced by mobile phones is that the mobile phone screen is broken, which not only affects the aesthetics of the mobile phone, but also affects the use effect, and there may be potential dangers, such as loss of waterproof function. But don’t worry, let’s learn how to fix a broken phone display today!

1. Back up the data on your phone first, then turn off the phone and use the card pin to remove the SIM card. Then use a precision screwdriver to remove the bottom 3.4mm pentagonal screw located next to the Lightning connector. To make sure you don’t lose any removed components and screws, We recommend that you put the screws in the Screw plate storage box.

Use the 861DW Hot Air Rework Station to heat the edges of the iPhone X screen, since it sticks firmly to the rest of the case, you must heat the glue before removing the display.

3. Use the screen suction cup to create enough space to insert the triangular opening tool, then insert the triangular opening tool and move the tool around the frame of the iPhone at one time to completely remove the stuck display. Use the pick to continue pushing upwards to dislodge the nose from the stainless steel frame.

4. Use the hard plastic pick to gently push the display up to remove the display from the aluminum frame. When the display is completely detached, you can slowly fold it to the side of the standby button. Hold it against a stable object so that it remains in a vertical position.

5. Use a precision screwdriver to remove the cover, carefully disconnect the battery connector, use a spudger to disconnect the display connector, and then remove the earpiece and front sensor assembly.

6. Take out the prepared new display and install the earpiece speaker and front sensor assembly to the new iPhone X display assembly. Then connect the iPhone X original display screen and the new iPhone display screen to the iPhone photosensitive data programmer. Use the iPhone photosensitive programmer to read the data first, and then write the data. After writing the data, remove the two iPhone displays.

7. Install the new iPhone display to the iPhone X. After installation, test the display function and touch function, everything is normal.

The above is the repair method of iPhoneX screen broken, I hope it is useful to everyone, I wish you a successful screen replacement! For more details, please follow the PHONEFIX Shop Team!