If you find that you are good with work that involves your hands, consider giving woodworking a try. From measuring to cutting to piecing things together, it is a fun way to spend your time. The tips below will help you get started on the right foot, ensuring your first project is a great one.
The reason why many power tools have guards on them is to keep you safe. Never remove the guards off of any of your tools. You may not understand why they are there, but they are there for a reason. They are there to protect you from sharp blades, moving parts and other things that could potentially hurt you.
Become more accurate by using a drafting square. If you need an accurate square that’s about 2" to 3", you have limited options. Drywall squares tend to be very inaccurate. With carpenter squares, you have to hook them onto your work piece’s edge. A drafting square can be easily used if you happen to have one lying around. If you don’t, they are pretty cheap to find at art stores. They are incredibly accurate and as useful as a tape measure.
Keep the floors safe in your woodworking shop. Dust builds up on the floor, making it dangerous for walking. Coat the slippery areas of your shop with a mixture of crushed walnut shells and paint. The walnut shells are just the right consistency to keep the floor rough enough for walking, even when sawdust builds up.
When trying woodworking for the first time, opt for cheaper woods or even scrap woods. You are going to make mistakes along the way when you are first starting. Make sure you make those mistakes on wood that’s easily replaceable. There’s nothing worse than making a rookie mistake on a very expensive piece.
Visualize your woodworking project from start to finish before taking any tool to the wood. Let your brain and imagination help you get used to what you’re about to do. In fact, when you visualize, you’ll be much less likely to make costly mistakes during the middle of a project.
Many people use utility knives to cut veneer. This can be very dangerous; however, take heart, there is a better way. When cutting veneer, consider using a rotary cutting tool. These inexpensive tools can be purchased in your local fabric shop. Rotary cutting tools allow you to trim veneer to the perfect size.
You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.
Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.
If you mark your intended cuts with pencil lines, try not to actually cut them! You might be lined up at first, but it is possible to get a little off later in the cut, resulting in pieces that fit less that perfectly. It’s better to cut the edge of the pencil line and then sand the rest of the marking off.
You make mistakes. Always remember that, but never say it. You have made mistakes in the past, you are going to make them in the future. Always treat them as learning opportunities. However, never point them out to others or talk about them. Others may not notice, or even care. They’re likely to just be impressed you did something they couldn’t.
Keep in touch. Chances are that you’ll be away from other people in your woodworking shop. Still, you are going to get stumped or stuck on particular projects. Another woodworker could give you the answers that you need. Someone will have dealt with your issue before and will have an answer for you.
Wood is an expensive material to work with. It becomes really expensive when you are working on larger projects. Save some money by using cheaper and less attractive woods for areas of the project that are not on display. Save the high quality wood for the structure, tops and front of the project.
Wear goggles when you are working on your pieces. Wood might fly toward your face at any time, and you want to avoid a trip to the emergency room. You might not think that it is a possibility, but this is one time when it is really important to be cautious.
Learn about the different type of wood and their characteristics. This will help you choose the right wood for your projects. For example, pine is a popular choice for common wood projects and furniture, but you have to be aware of the knots that can sometimes affect your cutting. A wood like maple has a smoother grain and less knots.
Every good woodworking shop needs a quality combination square. It is needed for almost every job you’ll tackle. It makes a good depth gauge, using the straight side. It is, of course, perfect for miter cuts. Most have a level built right in. A good combination square is a must-have tool, right up there with a hammer and drill.
When staining a completed woodworking project stir your stain often, especially if you are using a liquid stain. As stain sits, the sealer separates from the stain and settles to the bottom. If you do not stir the stain often, your piece may have different shades of stain because of this separation.
If you are good with your hands, woodworking is the activity for you. Take your time to absorb the knowledge you have gained here and you’ll find that entering the world of rotary tool bits with wood becomes easier. In the end, you’ll find success with your projects and a new hobby to enjoy.
