Advantages of Body Armor Direct Spear/ BALCS Soft Armor Inserts

Body armor is there to protect you in a life-threatening emergency. But it doesn’t have its job done if you’re not wearing any. You can take some significant steps to ensure that your body armor is doing its job. Including utilizing spear/ BALCS soft armor inserts. These are designed to securely attach directly to your vest to reduce any risk of movement. Or shifting while adding extra protection.

Body Armor Direct Spear / BALCS Soft Armor Inserts are available in a wide variety of sizes and thicknesses so that they can be adjusted to fit your specific needs.

How Body Armor Direct Spear/ BALCS Soft Armor Inserts Can Protect You?

Additional Protection

When you’re wearing protective body armor, and it comes in direct contact with trauma, the force of the event is not just absorbed by your protective vest. The trauma can be transmitted to the base layer of your clothing. In the case of soft armor inserts, the trauma is absorbed directly by them, which means that your base layer is not exposed to any dangerous forces that could cause severe damage.

Protection from Movement

If your body armor is made from something soft and can move around, it may be vulnerable to damage. That’s what makes these inserts so important. You can use them to add extra protection against any movement or external forces that could harm the integrity of your vest. As a result, you’ll have a lesser chance of being injured in a life-threatening event.

Prevent Potential Injuries

Body Armor Direct Spear / BALCS Soft Armor Inserts can also provide soft armor protection if you don’t have any. This means they can prevent any potential injuries from an unprotected vest. They’re designed so that they can be adjusted easily to fit your specific vest and body size. Their ability to hook securely onto your vest makes them an excellent solution for extra protection in this regard.

Eliminate Guesswork and Confusion

It’s hard to know what size of body armor you need by looking at it. With these inserts, it’s simple to figure out which one will fit you best because they’re available in various sizes. The thickness and material used to make them provide an excellent solution for the issue of guessing which one will be the most suitable.

Designed for Heavy-Weight Vests

These inserts are designed to be used with heavy-weight vests and other models that may restrict movement. As a result, this eliminates the risk of you being injured due to your vest shifting while you’re wearing them. They can be used with up to 3 layers of soft armor to give you maximum protection and ensure that your vest will not move around while you’re wearing these.

Why Choose Tactical Scorpion Gear Level IIIA Body Armor Pair Hard 8″ x 10″ Plates | Stops .44?

The plates are made from a Schott Super-Duraluminum, one of the strong and light metals in the world. It’s 100% non-magnetic and will not rust. The ceramic mineral is fused to the metal to produce this ultra-hard, rigid material. The final product is immune to extreme heat, cold and moisture with a tensile strength far exceeding any steel alloy available today.

The products are designed to stop the following calibers of ammunition: The Level IIIa hard armor will stop all handgun rounds up to a .44 Magnum, including semi-jacket hollow point (SJHP) projectiles. An optional Level IIIA soft insert can be added to defeat 9mm and .40 S&W JHP rounds. The Level IV hard armor will stop all rifle/carbine calibers, including steel core and APM2.

Key Benefits:

Made from a Schott Super-Duralumin, one of the strongest and lightest metals in the world. It’s 100% non-magnetic and will not rust. The ceramic mineral is fused to the metal to produce this ultra-hard, rigid material. The final product is immune to extreme heat, cold, and moisture, with a tensile strength far exceeding any steel alloy available today.

.44 Magnum stopping power

Level IIIa hard armor will stop all handgun rounds up to a .44 Magnum, including semi-jacketed hollow point (SJHP) projectiles. You can add an optional Level IIIA soft insert to defeat 9mm and .40 S&W JHP rounds.

The spine of the plate extends out 2″ to the bottom edge of the plate. It gives you 2″ more protection than our other Level IIIA plates, but it will not interfere with your belt or holster.

Conclusion:

Body Armor Direct Spear / BALCS Soft Armor Inserts are an excellent way to add extra protection to your protective body armor without having a bulky vest. They’re well suited for use with heavy-weight vests that restrict movement and make it difficult to know which size you need. That will eliminate the risk of you being injured while wearing them. They’re also available in a wide variety of sizes and colors so that they can be adjusted to fit your needs.