prant010Assignment 4: Final AssemblyFor the final cut, I used a 3/4 inch thick piece of MDF that I had remaining from an earlier project. The “normal” tile spaces (the ones…May 15, 2019May 15, 2019
prant010Assignment 4: PrototypingSince my file for the entire Scrabble board was large, and quite repetitive, it was not necessary to cut the entire thing for my test cut…May 1, 2019May 1, 2019
prant010Assignment 3: Final AssemblyWhen I converted the Rhino rendering to an OBJ file, some of the detail I had originally had on the keychains, such as the ridges at both…Apr 30, 2019Apr 30, 2019
prant010Assignment 3: File WorkThe model I chose to 3D print was a series of keychains that resemble the old hotel keychains. I was interested in making this because I…Apr 18, 2019Apr 18, 2019
prant010Assignment 2: Final AssemblyThe main thing I decided to change from my test cut was the overall size of the piece. This was in part because I realized I didn’t want…Apr 17, 2019Apr 17, 2019
prant010Assignment 4: Brainstorming & IdeationOne idea I have for the final project would mix the functions of the laser cutter and the CNC router to create a scrabble board. For many…Apr 17, 2019Apr 17, 2019
prant010Assignment 2: CNC CuttingFor my test cut, I chose to cut two units of my honeycomb, at the actual scale of my piece. The test cut measures 24 inches wide by 18…Apr 11, 2019Apr 11, 2019
prant010Assignment 2: File WorkI chose to create a decorative piece for the wall, to hang above the guest bed at my house, as that room is being renovated this summer…Apr 11, 2019Apr 11, 2019
prant010Assignment 2: Brainstorming & IdeationMy first idea for Assignment 2 is to make a piece of wall art that can hang over my bed. Since my room is mostly buttercup yellow, I want…Mar 8, 2019Mar 8, 2019
prant010Assignment 1: Final AssemblyFor the final model, I chose to raster the name and coordinate of the lake on to the top layer of the topographic map. This was done so…Mar 6, 2019Mar 6, 2019
