Troubleshooting Wi-Fi Connectivity Issues with HP Tango Printers

2 min readOct 5, 2023

In today’s fast-paced digital world, seamless Wi-Fi connectivity is essential for various devices, including printers.

HP Tango printers are designed to offer convenient wireless printing, but like any technology, they can encounter connectivity issues.

This article will guide you through the steps to troubleshoot and fix Wi-Fi connectivity problems with your HP Tango printer.

Common Wi-Fi Connectivity Issues

Printer Not Connecting to Wi-Fi:

Ensure your printer is within the Wi-Fi range.
Check if the Wi-Fi indicator on the printer is solid and not blinking, indicating a stable connection.
Verify that the Wi-Fi network password is correctly entered.

Weak Signal or Intermittent Connection:

Relocate the printer closer to the router or access point.
Remove obstacles and interference sources like other electronic devices.
Update your router’s firmware for better compatibility.

Network Name or Password Changed:

If your network credentials have changed, update them on the printer.
To access the printer’s control panel, go to Settings > Network > Wireless Setup Wizard to reconfigure.

Troubleshooting Steps

Restart Your Devices:

Turn off the printer and unplug your router for about 30 seconds.
Plug the router back in and wait for it to fully restart.
Turn on the printer and check the connection.

Check Wi-Fi Network:

Verify that your Wi-Fi network is functioning correctly with other devices.
If not, contact your Internet Service Provider (ISP) or router manufacturer for assistance.

Update Printer Firmware:

Outdated firmware can cause connectivity issues.
Visit the HP website to check for the latest firmware updates for your Tango printer and install them.

Reconnect to Wi-Fi:

Access your printer’s control panel and navigate to Settings > Network > Wireless Setup Wizard.
Follow the on-screen instructions to connect your printer to the Wi-Fi network again.

Check Printer Placement:

Ensure your printer is not placed too far from the router.
Eliminate any objects or walls that might block the Wi-Fi signal.

Network Troubleshooter (Windows):

On your computer, go to Settings > Network & Internet > Status.
Click on “Network troubleshooter” and follow the prompts to diagnose and fix network issues.

Printer Reset:

As a last resort, you can perform a factory reset on your printer.
Refer to your printer’s manual for instructions on how to reset it to its default settings.

Conclusion

HP Tango printers are renowned for their wireless printing capabilities, but even the best technology can run into connectivity problems.

By following the troubleshooting steps outlined in this article, you can resolve most Wi-Fi connectivity issues with your HP Tango printer and enjoy uninterrupted printing.

If the issue persists, don’t hesitate to reach out to HP customer support for further assistance.