HT Coil Manufacture

Rajamane services square measure one amongst the pioneers of HT coil Manufacture in Republic of India. Manufacture of Partial electrical motors & Generators. LT/ HT Coils provide service — vary : up to 13.8KV

We square measure with comprehensive electrical/mechanical repair facilities, supported by our in-depth information, we will handle all aspects of Motor/Alternator/Generator/Servo & Spindle repairs thought up to 30T.

Spark plug wires have an outer insulation several times thicker than the conductor, made of a very flexible and heat-resistant material such as silicone or EPDM rubber. The thick insulation prevents arcing from the cable to an earthed engine component. A rubber “boot” covers each terminal.

Dielectric grease can be used to improve insulation; a small amount can be applied in the inside of the rubber boot at each end of each wire to help seal out moisture. Printing on spark plug wires may include a brand name, insulation thickness (in millimeters), insulation material type, cylinder number, and conductor type (suppressor or solid wire).

The wire from each spark plug is just long enough to reach the distributor, without excess. Each end of a spark plug wire has a metal terminal that clips onto the spark plug and distributor, coil, or magneto. There are dedicated spark plug wire pliers, tools designed for removing the terminal from a spark plug without damaging it.

For more details: HT Coil Manufacture