Programming the Tello Drone using Swift

David Such
Jun 8, 2019 · 6 min read

In this article we will explore how to write a simple iOS app in Swift to allow control of the Tello Quadcopter.

UPDATE: I’ve published a more polished version of this program on the Apple App Store. Check it out — download FlightPlan! for free.

FlightPlan app.

The Tello Drone

Tello is a mini drone equipped with a HD camera that is manufactured by Ryze Robotics and includes a flight controller with DJI smarts. It is a great drone to learn to fly on as you can use it indoors and because it is so light (80 grams), crashing is fairly painless if you have the prop guards on. I have crashed mine (a lot) and the worst that has happened is that a propeller came off, which is easy to replace. It is also relatively inexpensive.

You can manually control it using either an app (iOS or Android) on your phone, or a combination of the app and a dedicated Bluetooth remote. Either works fine. If you do get the Bluetooth remote be careful of not moving out of Bluetooth range of your phone while you are flying the drone.

Tello Specifications

  • Weight: Approximately 80 g (Propellers and Battery Included)
  • Dimensions: 98×92.5×41 mm
  • Propeller: 3 inches
  • Built-in Functions: Range Finder, Barometer, LED, Vision System, 2.4 GHz 802.11n Wi-Fi, 720p Live View
  • Port: Micro USB Charging Port
  • Max Flight Distance: 100m
  • Max Speed: 8m/s
  • Max Flight Time: 13min
  • Max Flight Height: 30m

Programming — Firmware Versions

Apart from being a good platform to earn your flying chops, the best thing about the Tello from my perspective is that you can write a script or a program to control the drone remotely. This opens up a lot of possibilities.

Note that there are three different Tello’s that you can buy (the Tello, the newer Tello EDU and the Ironman Edition), and they use slightly different API’s. So make sure that you use the appropriate version for your drone.

You can work out which firmware you have by connecting your mobile to the Tello WiFi, opening the official Tello app, tapping on settings (the gear icon), then tap on the More button, and finally tap on the “…” button to the left of the screen. This should bring up the screen shown below which includes the firmware and app version numbers. My Tello is running firmware version 1.03.33.01. You can download the relevant SDK document for this version.

The Tello EDU uses version 2.0 of the SDK. You can download a PDF of the V2 SDK from here.

Commands that are available in SDK v1.3 but not v2.0 are:

  • height?
  • temp?
  • attitude?
  • baro?
  • acceleration?
  • tof?

Conversely, commands that are available in SDK v2.0 but not v1.3 are:

  • stop (hover)
  • go x y z speed mid (same as go x y z speed but uses the mission pad)
  • curve x1 y1 z1 x2 y2 z2 speed mid (same as curve x1 y1 z1 x2 y2 z2 speed but uses the mission pad)
  • jump x y z speed yaw mid1 mid2 (Fly to coordinates x, y and z of mission pad 1 and recognize coordinates 0, 0 and z of mission pad 2 and rotate to the yaw value)
  • mon
  • moff
  • mdirection
  • ap ssid pass
  • sdk?
  • sn?

The Tello EDU also has a swarm mode if you want to control a bunch of drones.

Programming — Python

There are plenty of examples on how to use Python to control your Tello. For drones running v1.3 have a look at the DroneBlocks code. For the Tello EDU (i.e. v2.0 of the SDK), Ryze Robotics provide some sample code for you to download and try out.

I uploaded the DroneBlocks code using my Raspberry Pi connected to the Tello WiFi and it worked a treat. Given that there are lots of Python examples, I thought I would put together something in Swift and work up to an app which provides additional functionality not found in the official Tello app.

Programming — Swift (iOS)

We access the Tello API by connecting to the airframe via a WiFi UDP port. Once a connection is in place, the drone is controlled using simple text commands.

The first thing we want to determine is whether our device is connected to the Tello WiFi. There are a couple of Swift functions which can assist with establishing this. The Tello SSID name contains the string “TELLO” (see image above), so this is what we will use to determine whether we are connected to the correct WiFi network.

Swift WiFi functions

We can use the code above in our ViewController to ensure that we are hooked up to the Tello, and if not provide an alert. The screenshot below shows this implemented in my proof of concept app.

The code for the ViewController is shown next. It should be fairly self explanatory.

View Controller for our Tello App

UDP

UDP (User Datagram Protocol) is a communications protocol, similar to Transmission Control Protocol (TCP), but used primarily for establishing low-latency, low-bandwidth and loss-tolerating connections. UDP sends messages, called datagrams, and is considered a best-effort mode of communications. With UDP there is no checking and resending of lost messages (unlike TCP).

Both UDP and TCP run on top of the Internet Protocol (IP) and are sometimes referred to as UDP/IP or TCP/IP.

UDP provides two services not provided by the IP layer. It provides port numbers to help distinguish different user requests and, optionally, a checksum capability to verify that the data arrived intact.

The Tello IP address is 192.168.10.1. The UDP Services available are:

UDP PORT: 8889 — Send command and receive a response.
UDP SERVER: 0.0.0.0 UDP PORT: 8890 — Receive Tello state.
UDP SERVER: 0.0.0.0 UDP PORT: 11111 — Receive Tello video stream.

If you want to send and receive via UDP on iOS then the two main libraries in use appear to be SwiftSocket and GCDAsyncUDPSocket.

Swift Socket looks to be the simpler of the two libraries, so I used that for my initial attempt. I put together a Tello Swift class to do the heavy lifting. It is reproduced below and works as advertised. You will need to put together your own UI but if you hook up the three relevant buttons (take off, land and stop) in the View Controller then you shouldn’t have any problem reproducing what I have done.

I will add a bit more functionality to the app (e.g. video) and then stick it up on the app store for download.

The Tello class in Swift
Demo App Screenshot

Originally published at http://reefwingrobotics.blogspot.com.

David Such

Written by

Reefwing Software · iOS & Android Development · Robotics · #followback #iOS #Android #developer #indiedev #robotics #startup #arduino #raspberrypi

Welcome to a place where words matter. On Medium, smart voices and original ideas take center stage - with no ads in sight. Watch
Follow all the topics you care about, and we’ll deliver the best stories for you to your homepage and inbox. Explore
Get unlimited access to the best stories on Medium — and support writers while you’re at it. Just $5/month. Upgrade