How To Fit Kitchen Worktop Corner Joint — The Expert’s Advice

Not everyone loves working in the kitchen, and those who do know the importance of having a tough and sturdy worktop that brings modernity to modern kitchens. Popular kitchen worktops are made of wood, lamination, stone, and granite; they come in various styles. However, you need to cut and fit it according to your preference. This work is best done by a professional. But if you have chosen to do it yourself, you need some guidance from the expert. This article will throw light on some expert advice from REJS on how to fit kitchen worktop corner joints.

In this article, you will learn in simple steps to fit a kitchen worktop corner joint. If you think of it as a hard task, then following these steps can be really helpful to you.

Before we get to work, here is a list of things you will need to begin your work.

Tools you will need:

• Contact adhesive
• Long and short wood screws
• Masking tape
• Notepad and pencil
• Power drill
• Power router and bits
• Profiling jig
• Screwdriver
• Tape measure

Cutting the Worktop Counter:

If you are going to cut the counter on your own and not with the help of a professional, ensure to adhere to basic rules and your safety to make a clean cut. Listed below are the things to take note of:

Here are some of the things you need to take care of before you start sawing the worktop;

• Make sure your worktop is firmly secured before you start sawing. Get a circular power saw with a fine-tooth and a thin blade to get a fine edge.
• Wear a mask and eye safety goggles to protect yourself from minute particles that may harm you.
• Draw the design you want on the whole sheet of the laminate, granite, or wood, whatever you have picked for your countertop — no start cutting by tracing through the outlines.
• Cross-check the measurements that you have calculated. Measure the countertop and the sheet you are about to cut, and using a power saw, cut it out.
• Smooth down any rough edges from the sheet with a file or sandpaper.

Fit Kitchen Worktop Corner Joint

We advise you not to take up this task alone but get a hand or two while installing the worktop corner.

1. Position the pre-cut laminate worktop sections on the base units, and check that both the base and the worktop are of the same size as calculated. Once you’ve put the worktops in place, check the fastening positions.
2. Apply silicone sealant to the counter base and the price of the countertop that you cut.
3. Now take the sheet you have cut and securely place it on the base. Tap the corner slightly with a rubber mallet to ensure adhesiveness.

We hope this article helped you know the steps to first a kitchen worktop corner joint easily. Check out our other articles and blogs on kitchen and furniture. If you are searching for the best kitchen furniture, kitchen storage UK, and corner unit storage at the best prices, we highly recommend you check our website.