How to Fix Your iPhone’s Broken Screen
How to Fix an iPhone Screen
iPhone screen repair is easy when you follow these steps correctly. The first step is to remove the back cover by pressing firmly on the top right corner until you hear a click. Next, gently pull the bottom left corner of the phone away from the body. Finally, peel the front panel off the display using your fingernails.
How to Fix Your iPhone’s Broken Screen
How To Fix Your Broken iPhone Screen — 5 Easy Ways
Have you ever dropped your iPhone and had to face a terrible decision that doesn’t seem like it has an easy answer? There’s no need to worry, as there are many ways to fix your broken iPhone screen. You don’t even need to be a tech expert! Read on for the five most straightforward ways to put your device back together again and start using it ASAP.
Find a Clear Plastic Wrap
If your iPhone screen is cracked, you’ll need to find clear plastic wrap to fix it. There are many different types and sizes of plastic wrap available, so you’ll need to measure the dimensions of your screen and choose the right size. Once you’ve found the right size, cut a piece of the wrap to fit over the broken area and use clear tape to secure it.
Purchase a Sheet of Glass
If your iPhone screen is cracked, you’ll need to purchase a sheet of Glass to replace it. Be sure to measure the dimensions of your phone before buying the Glass to get the correct size. You can find sheets of Glass at most hardware stores.
Once you have your new sheet of Glass, use a screwdriver to remove the screws from the old screen. Then, carefully remove the old Glass with a knife or razor blade. Be careful not to damage the LCD underneath. Make sure to avoid damaging the LCD while doing this.
Now, take your new sheet of Glass and place it over the LCD. Use tape or another method to secure it in place. Your new screen should now be protected from further damage! Finally, replace the screws and reassemble your phone.
Purchase a Cleaning Fluid
You’ll need to purchase a cleaning fluid if your iPhone screen is cracked or shattered. There are a few options available, so choose one compatible with your iPhone model.
Once you have the cleaning fluid, follow the instructions on the packaging to clean your screen. Be sure to work in a well-ventilated area and avoid getting any liquid on your skin or clothes.
After cleaning your screen, you can apply a new or tempered glass screen protector. This will help keep your screen looking fresh and prevent further damage.
Remove the Screen Protector
Removing the screen protector from your iPhone is a simple process that needs to be done carefully to avoid damage to the phone. There are a few different ways to remove the screen protector, depending on your phone type.
You can use the suction cup method if you have an iPhone 6 or newer. Start by turning your phone off and removing the SIM card tray. Then, place a suction cup on the top of the screen, ensuring it’s centered over the home button. Gently pull up on the suction cup until the screen protector starts to come off. If it’s not coming off quickly, try heating the adhesive with a hair dryer before trying again.
There’s the credit card method for older iPhones or those who don’t want to use a suction cup. Start by powering off your phone and removing the SIM card tray. Then, take a credit card or other thin piece of plastic and insert it between the edge of the screen protector and the phone body. Slowly work around the screen’s perimeter until the protector pops off.
Once you’ve removed the old screen protector, clean both surfaces with rubbing alcohol before applying a new one.
Remove the Broken Glass
Assuming that you have already removed the back panel of your iPhone, use a suction cup to lift and remove the front panel slightly. Be careful while removing the front panel, as some fragile cables are still attached to it. Next, locate the broken Glass and use a sharp object to remove it delicately. Take your time with this step, as rushing could result in further damage. Once the fractured Glass has been removed, proceed to the next step.
Apply the New Screen
Assuming you have your new iPhone screen, it’s time to apply it. But before we get started, there are a few things you need to do.
First, power off your iPhone. You can do this by holding the power button for a few seconds and then sliding the power icon from left to right.
Next, look at the new screen and ensure it’s the right size and shape for your iPhone. If everything looks good, peel off the protective film on both sides of the new screen.
Now it’s time to apply the new screen. Start by aligning the top of the new screen with the top of your iPhone’s display assembly. Then gently push down on the rest of the new screen until it snaps into place.
Finally, turn on your iPhone and test out the new screen. Everything should be working correctly now!
