How to Configure an IP Camera on Your Local Network?

3 min readMar 4, 2024

IP cameras are becoming extremely popular among customers due to their great features and declining prices. Moreover, there are many IP camera packages in the market, and you can get one for your needs.

These cameras are network-based cameras and can be accessed over the Internet. If you have purchased this camera recently, you may need to install it. However, configuring this camera can be daunting if you are a beginner. But you can check out the following blog to learn how to set up an IP camera. So let’s get started!

Steps to set up an IP camera

Are you ready to set up your IP camera? Well, there is no need to worry, as we will walk you through the steps to ensure a smooth installation process. Find the below steps to configure your IP camera without any hassle.

Step 1 — Connect the camera to the network

First of all, you need to connect the IP camera to the local area network. An Ethernet cable will be used for this purpose. Through this cable, you can connect the camera to your gateway, router, and access point. However, one can also connect the camera wirelessly to the router if it has Wi-Fi.

For wired cameras

If you have a Wi-Fi IP camera, you can power it with a suitable adaptor and follow the instructions in the manual to connect it to the Wi-Fi network. To easily pair the camera, you can simply scan the QR code.

For wireless cameras

Plug one end of the Ethernet cable into the free port on your router and the other into the camera’s Ethernet socket. For a PoE IP camera, a single is enough to provide both data and power to the camera.

To get the IP camera within your budget, contact the best CCTV camera provider in Singapore and buy a suitable camera.

Step 2 — Locate the IP address of the camera

Now, you have to find the IP address of the camera on your network. With an IP address, devices communicate with each other on the network. To configure the camera setting, you need to find its IP address. There are multiple ways to find the IP address of your purchased camera.

First of all, you can use the vendor’s utility program. You can use the vendor’s website to install the utility program. Another way to find the IP address of your IP camera is to use the Command Prompt program.

Step 3 — Access the web interface of the camera

After finding the IP address of your camera, you can access its interface by using any web browser. By accessing the web interface, you can configure different settings of the camera, like recording schedule, motion detection, video quality, etc.

Open your web browser, and fill in the IP address of your IP camera. Enter the username or password if needed, which can be found on the label on the camera box or on the user manual.

Step 4 — Configure the network settings

Now, you have come to the last step of setting up your IP camera. Lastly, you have to configure the IP address of your camera to match the network scheme. If you have a dynamic IP address, it will change when you reboot the camera. You can set a static IP address that will not change when you reboot.

One of the best IP cameras is an IP dome camera. If you are from Singapore, find the HD IP dome cameras in Singapore, and purchase the one for your needs.

Follow these simple steps to configure an IP camera and enjoy high-definition surveillance from anywhere worldwide.