How to Install a Carbon Monoxide Detector? -For Safe Home
How to Install a Carbon Monoxide Detector?
Three hundred people die each year from carbon monoxide poisoning. Do not risk being part of that statistic.
Did you know?
Home owner insurance rates continue to rise steadily throughout the United States, more than 50% in the last 10 years alone. Home Insurance Very Important For Everyone.
To Save Money Up To 70% Today, Compare Your Home Insurance Below Here. Its Take a Minute Only.
Compare Now — https://gethomeownersinsurance.net/
Step 1: research detectors
Find out what kind of carbon monoxide detector is right for your home. There are two popular types: powered by battery or by alternating current.
Tip
Battery powered models are preferable because they can be placed near the ceiling, which is important because the CO increases. But if you know you’ll never remember changing the batteries, go with an exit detector.

Step 2: Choose the location
Decide where your detector will go. You should be away from appliances that burn fuel and at least 15 feet from heating or cooking units and wet areas, such as the bathroom. Also, make sure that no furniture or curtain covers the alarm.
How to Install Smoke and Carbon Monoxide Detectors?
Tip
The Consumer Product Safety Commission recommends that the unit be placed close to your room, so it will wake you up if it goes out.
Step 3: Read the installation instructions
Take your product out of its packaging and read the installation instructions. If it is a unit with AC power, simply connect it to the wall. If it is a battery unit, it must come with screws and anchor bolts.
Step 4: Mark the wall with the pencil
Align the unit with the wall, marking with a pencil where the screws should go. Many carbon monoxide detectors have a separate twist-off base, which facilitates the installation of the unit.
Step 5: Make holes in the wall
Now, use the wall hit to make a hole in the wall just above those points. Make sure the holes are not larger than your screw anchors; You will want them to fit well.
Step 6: Touch the anchors in the holes
With a hammer, tap the anchors into the holes.
Step 7: screw the base to the wall
If you have a separate base, screw it to the wall. If the base does not separate, place the screws on the wall but do not tighten them; Make sure the detector fits them and you can make sure.
Step 8: Install the battery
Install the battery in your detector, then place it on the wall.
Step 9: test detector
Be sure to try it, not only so you know what works, but also so you know how it sounds.
Tip
Consumer Reports recommends detectors with warnings that become stronger and faster as CO increases.
Step 10: Mark the calendar
Mark your calendar now to replace the batteries in one year. Then sleep peacefully, knowing that you are safe!
Did you know?
The symptoms of carbon monoxide poisoning are headache, shortness of breath, fatigue, dizziness and nausea.
Read Below:
Who Knew Smoke and Carbon Monoxide Detectors Expired?
- How to Install a Carbon Monoxide Detector For Safe From Home Fire.