ArchiFurnitureChair COMPLETEAfter each piece was sanded with 160 grit sandpaper. It was time to assemble the chair together. The over design was extremely simple as…Nov 3, 2016Nov 3, 2016
ArchiFurnitureChair AssemblyOne issue with the finger joints was the thickness of both my chair legs were incorrect. The correct thickness was 23.8mm when both my legs…Nov 3, 2016Nov 3, 2016
ArchiFurnitureChair CNC FilesThe final design for my chair is quite simple and easy to put together. I wanted to do this because the chair will be given to my 3 year…Nov 3, 2016Nov 3, 2016
ArchiFurnitureChair ConceptsThe initial concept was a small rocking chair for my 3 year old nephew. However when I approached John with the design, he pointed out…Nov 3, 2016Nov 3, 2016
ArchiFurnitureChair PrecedentsMy brief for the chair is a small reclining stool for my 3 year old nephew. A stool that would be flat packed and easily assembled by his…Nov 3, 2016Nov 3, 2016
ArchiFurniture5 Axis CNC TutorialFor our second task we will be using the 5 Axis CNC machine in Building 45.Nov 3, 2016Nov 3, 2016
ArchiFurnitureTable COMPLETEIt was surprising the outcome of this table once it was complete. The plywood I used extremely poor in quality, none of that nice european…Nov 3, 2016Nov 3, 2016
ArchiFurnitureTable Top CNC’dAfter the pieces of plywood were PVA’d together, dried and set. The slab is put into the Gossard Workshops CNC machine. The machine used a…Nov 3, 20161Nov 3, 20161
ArchiFurnitureTable Legs Slot JointThe slot joints for the table legs are marked first using a T square to ensure perfect right angles. The ban saw is used then to take the…Nov 3, 2016Nov 3, 2016
ArchiFurnitureTable Legs Pilot HolesOne of the main issues i ran into with making the table legs is making the holes for the screw joint that connects the 2 parts of the table…Nov 3, 2016Nov 3, 2016
