Luxury Non Woven Wallcovering
Does not recognize its existence is pseudo-science, but must be within the scope of recognition. The degree of recognition is different and the results are different. The test conditions for the color difference are described in the standard QB / T 3805–1999: When the appearance quality of the test specimen is checked, the standard light source box can be used if necessary under the condition of sufficient light (daylight of the eye window) The According to our experience, the color of the wallpaper if the backlight or in the case of direct sunlight, due to light interference and wallpaper reflection differences, will be reflected in the color difference. So in the use of the environment for the light or direct sunlight environment as far as possible the use of printing patterns more rich wallpaper, because the pattern of reflection will be more than its color reflection, so it is good to avoid color. In addition, if the plain wallpaper is not taken light, you can use the U-turn posted method, effectively avoid color. If different batches of wallpaper used in the same room, you can use the same batch of wallpaper on different walls can also avoid unnecessary trouble. Q: How do I change wallpaper? A: If the next update wallpaper, just the old wallpaper after the opening of the surface of all peeled off, paper-based stay in the wall. Such as paper-based and wall bonding firmly, the new wallpaper can be directly mounted on it, but should avoid the new wallpaper seams and old paper joints just hit the same position. Such as tearing the wall if damaged, you need to play putty re-treatment, and then brush the base film, dry after the new wallpaper can be posted.
Q: wallpaper construction after the need to pay attention to what matters in order to protect the wallpaper? This wallpaper does not have to first soaked in water and then posted. Directly with the United States and Germany gelatin, plus white latex, a small amount of water after mixing evenly, it can be posted directly. Scraper light scraping, careful broken paper.
7. Wooden plywood wall, ceiling surface, first round nail hat into the wood surface, in the nail at the oil putty, dry sandpaper polished, so as not to nail hat directly contact with the rust, pollution wallpaper front. 8. Some wallpaper, the thickness is too thin, there are through the base phenomenon. Should be in the base brush and paste wallpaper color similar to the background or base oil, to ensure that pure looking, without losing the character. 9. Adjust the adhesive, there should not be any fine particles mixed with impurities, otherwise the surface is not clean. 10. When the adhesive is dispensed, the wall and thin paper base are treated with thinner, ceiling and thick base.