We should be aware that potable water no longer can be taken for granted, since we are already facing water scarcity around the globe. Hence we want to introduce you to our Sansox Water Treatment Solutions. We invented whole water treatment solutions and have our own patented water products.
There is a clear benefit of using Sansox products when comparing to the existing conventional technologies.
If you want to make an impact right away, then cooperate with Sansox, the double winner of the Water Innovation Europe Award: sansoxico.com
Otherwise we are looking forward to introduce you to our products in the following paragraphs.
The OxTube
The OxTube provides a competitive alternative to traditional aeration methods, especially towards the end of the treatment process. With the help of the Oxtube, the mixing of chemical agents can be achieved effectively. The aeration process is guaranteed to minimise the problems that arise at municipal wastewater treatment plants. The OxTube can be used throughout the process, as aeration should be at a consistent level throughout. Instead of utilizing liquefied oxygen to keep oxygen levels high throughout the whole cleaning process, the OxTube can aerate the process several times, whilst also reacting to rapid increases in oxygen demand. At the same time, odor problems can be minimised as the need for open tanks is reduced. In different industries, the OxTube can be used to dissolve gases such as air, pure oxygen, ozone and Carbon dioxide into water sources to enable the extraction of dissolved iron, mangania etc. The PH of the process can also be controlled by dissolving chemicals such as H2O2 and CO2 into the water source. The OxTube can also dissolve other chemicals in liquefied or gas form into the process. This will help mineral collection in the OX-Flotation tank.
The SaoxFuge
The SaoxFuge separates solids of different sizes. 0-fibers are a good example of solids that can be collected from wastewater, simultaneously increasing overall efficiency through their reuse and lowering the cleaning demand at the end of the process. With the usage of a separator, a solid content of 0,45 % can be increased to 25–30 % for subsequent reuse in the process. A spiral separator, which separates liquids and solids of the liquid to different layers based on gravity or density of the materials. The separation is based in spiral flow of the liquid, which provides sufficient centrifugal force to a sediment organization of the components in the tube. Heavy components are separated by the centrifugal force of the spiral flow towards outer surface of the spiral pipe, and further to the final destination, which is an extension of the spiral and the outlet pipe. The outlet tube skims away the desired heavier material layer and leads it to the desired location or further processing.
VOX-flotation
VOX-flotation provides a new way of separating unwanted solids from water. Compared to conventional flotation system, VOX-Flotation does not need any dispersion water, as all cleaned water goes through the aeration process. The system is able to double flocks and solids collection with roughly halved energy consumption when compared to present advanced systems. It can be utilized also for difficult concentrate waters, produced e.g. by pulp and paper mills. This concept allows also getting rid of large waste water container pools with their energy consuming equipment.
Convinced? Contribute here: sansoxico.com
