The sim card is located on the side of the phone. Look on the side of your phone for How to Remove Sim Card From iPhone.Now you can Remove or switch the SIM card from your iPhone.
Read an Helpful Article: iPhone sim card
Above shared link of article have all the information with images.Turn off your phone for Remove Sim Card From iPhone, then push the end of a a paperclip into the hole and this should pop open a little drawer that holds the Sim card. If your phone is unlocked you should be able to replace that Sim with another.
How to Remove Sim Card From iPhone
Find your model below to locate the SIM tray. To pop open the SIM tray, insert a paper clip or a SIM-eject tool How to Remove Sim Card From iPhone 6 the hole beside the tray. Push in, towards the iPhone, but don’t force it. If you’re having difficulty iPhone 6 sim card the SIM tray, take your device to your iPhone 7 or an Apple Store for help. After you remove your SIM card from the tray, notice the notch in one corner of the new SIM card. Place the new SIM card into the tray — it will fit only one way, because of the notch. Then insert the tray into the device completely and in the same orientation that you removed it. The tray also fits only one How to Remove Sim Card From iPhone 6, 7, 8, x, 5, 4, and plus series.
Before beginning, ensure you have a SIM evacuation instrument and the new SIM card you wish to embed. It is prudent to control off the handset before expelling or embeddings a SIM card.
Look on the right-hand edge of the iPhone, underneath the power catch. You should see the diagram of the SIM plate, with a pinhole at the base end.
Embed the stick on the SIM evacuation instrument into the gap and press it in against a spring until the point when the SIM plate discharges. On the off chance that the SIM card plate is still in the iPhone, evacuate as clarified in stages 1–4 above. Place the SIM you need to use into the plate guaranteeing the gold contacts are looking down. One corner of the SIM is sliced off to guarantee amend arrangement.
How to Expelling Sim Card From iPhone
Re-embed the SIM plate into the handset, guaranteeing that the opening in the edge of the SIM card plate is towards the base of the handset.Drive the plate back in until the point when it is completely embedded, and flush with the edge of the handset.
Turn your iPhone on utilizing the power catch. On the off chance that your telephone was at that point turned on when you embedded the new SIM card, and it hasn’t been recognized, at that point kill the iPhone and on utilizing the power catch, at that point check once more.
Don’t attempt to remove the SIM card while the device is powered on. Doing so may harm the SIM card and/or the device.