Can I replace a T12 Fluorescent light tube with an LED Tube?
For last many years, the responsibility of lighting indoor commercial spaces lies on the fluorescent tubes only due to no better lighting option, but post the development of LED tubes, people were relying more and more on these tubes to lighten the bigger and wider indoor places. The efficiency, long life, and functionalities of LEDs make them worthy as compared to the standard T12 fluorescent tubes.
Can I replace a T12 Fluorescent light tube with an LED Tube?
The answer to this is yes as today the advancement in the LED lighting industry have made it possible, previously there were not so much LED plug-and-play replacement options for T12 lamps as no major lighting manufacturers were making these lights but now the things have changed with the introduction of a new magnetic ballast-compatible LED tube.
Today the T12 fluorescent tubes are getting vanished from the entire United State market and within the next few years, the T12 fluorescent tubes will become a thing of past. Additionally, the energy regulations and incentives from power companies have inspired people to move towards these LED tubes from the out-dated T12s fluorescent tubes.
Some of the best-LED Retrofits option for T12 replacement?
If you are also fed with the higher and increased electricity bills by using those T12 fluorescent tubes, then you can Shift to the LED Tubes; in case you are converting your existing T12 lamps to the LEDs you have some of the beneath options to choose from:
Option 1. You can install new, magnetic ballast-compatible plug-and-play LED tube from LEDMyplace
You can install a magnetic ballast compatible plug and play tube instead of T12 fluorescent tube and can have maximum illumination at the most reduced rates.
Option 2. Install electronic ballast-compatible linear LEDs and new electronic ballast
By buying the electronic ballast-compatible LED tubes you will have great flexibility and savings and can have maximum lighting results for at least 50,000 hours by keeping the replacement costs lower as well.
Option 3. You can install bypass-ballast linear LED lamps
The LED ballast bypass tubes can be directly wired into the socket for line voltage and for the ‘direct wiring’ of these LEDs, you can either remove the ballast or bypass the ballast. Just make sure that you have removed the shunted sockets, in case you don’t have the non-shunted sockets as these LED tubes can only work with non-shunted sockets.
The best thing you will find in these tubes is that while using these LED lamps over the T12 fluorescent tubes, you don’t have to worry about any failure of the ballast and hence there is neither the hassle of maintenance or replacement as well.
Option 4. Install a new LED fixture
This is one of the best alternatives for the newly constructed places, though the cost of a new LED fixture is relatively higher than a new fluorescent fixture it is not at all a thing to be worried about. The LED tube is the right choice for you when your main aim is to have better and enriched lighting results.
Reasons you should replace T12 Fluorescent tube with LED Tubes-
If you are still confused that whether you should replace a T12 fluorescent tube with an LED tube or not, then to make the understanding much clearer, beneath are some of the benefits of swapping fluorescent tubes with T8 LEDs:
- On contrary to the fluorescent tubes, the LEDs have no mercury which proves that these lights are much better and safer than the traditional form of lights.
- The LED tubes offer directional light and you can definitely illuminate the place where you need the lights to be thrown, while the fluorescents have multi-directional light which clearly indicates that the light is lost in the fixture and at the other unnecessary places as well.
- The T8 LEDs are much more efficient than the T8 CFLs and you can make greater savings in case you replaced them with the traditional form of lights.
- Most importantly, the quality of lights produced by these lights is better and these lights offer various different color temperatures options similar to fluorescent, but you will not face any kind of flickering issues that can happen with fluorescent.
- The average life of the T8 LEDs is 50,000 hours which is much higher than the average T8 LFL.
If you want further details regarding making the replacement from T12 fluorescent light tubes to the LED tubes, then you can contact the professionals at LEDMyplace that will help you to broaden your understanding regarding the accurate savings, which you can have post installing these LED tubes at the indoor commercial, residential and even at the industrial places as well. Each step of the calculation will be explained and you will surely get the best lighting products from us.
Still having questions? See this video to know the differences https://www.youtube.com/watch?v=aNDib-E-gds
