Part 2- Replica of Netflix App as container on Kubernetes-Installing Prometheus and Grafana on AWS EC2 instance.

Launch an EC2 t2.meduim instance using a spot instance to minimize the usage cost.

First of all, let’s create a dedicated Linux user sometimes called a system account for Prometheus. Having individual users for each service serves two main purposes:

It is a security measure to reduce the impact in case of an incident with the service.

It simplifies administration as it becomes easier to track down what resources belong to which service.

To create a system user or system account, run the following command:

sudo useradd \
    --system \
    --no-create-home \
    --shell /bin/false prometheus

— system — Will create a system account.
— no-create-home — We don’t need a home directory for Prometheus or any other system accounts in our case.
— shell /bin/false — It prevents logging in as a Prometheus user.
Prometheus — Will create a Prometheus user and a group with the same name.

Let’s check the latest version of Prometheus from the download page.

You can use the curl or wget command to download Prometheus.

wget https://github.com/prometheus/prometheus/releases/download/v2.47.1/prometheus-2.47.1.linux-amd64.tar.gz

Then, we need to extract all Prometheus files from the archive.

tar -xvf prometheus-2.47.1.linux-amd64.tar.gz

Usually, you would have a disk mounted to the data directory. For this tutorial, I will simply create a /data directory. Also, you need a folder for Prometheus configuration files

sudo mkdir -p /data /etc/prometheus

Now, let’s change the directory to Prometheus and move some files.

cd prometheus-2.47.1.linux-amd64/

First of all, let’s move the Prometheus binary and a promtool to the /usr/local/bin/. promtool is used to check configuration files and Prometheus rules.

sudo mv prometheus promtool /usr/local/bin/

Optionally, we can move console libraries to the Prometheus configuration directory. Console templates allow for the creation of arbitrary consoles using the Go templating language. You don’t need to worry about it if you’re just getting started.

sudo mv consoles/ console_libraries/ /etc/prometheus/

Finally, let’s move the example of the main Prometheus configuration file.

sudo mv prometheus.yml /etc/prometheus/prometheus.yml

To avoid permission issues, you need to set the correct ownership for the /etc/prometheus/ and data directory.

sudo chown -R prometheus:prometheus /etc/prometheus/ /data/

You can delete the archive and a Prometheus folder when you are done.

cd
rm -rf prometheus-2.47.1.linux-amd64.tar.gz

Verify that you can execute the Prometheus binary by running the following command:

prometheus --version

To get more information and configuration options, run Prometheus Help.

prometheus --help

We’re going to use some of these options in the service definition.

We’re going to use Systemd, which is a system and service manager for Linux operating systems. For that, we need to create a Systemd unit configuration file.

sudo vim /etc/systemd/system/prometheus.service

Prometheus.service

[Unit]
Description=Prometheus
Wants=network-online.target
After=network-online.target

StartLimitIntervalSec=500
StartLimitBurst=5
[Service]
User=prometheus
Group=prometheus
Type=simple
Restart=on-failure
RestartSec=5s
ExecStart=/usr/local/bin/prometheus \
  --config.file=/etc/prometheus/prometheus.yml \
  --storage.tsdb.path=/data \
  --web.console.templates=/etc/prometheus/consoles \
  --web.console.libraries=/etc/prometheus/console_libraries \
  --web.listen-address=0.0.0.0:9090 \
  --web.enable-lifecycle
[Install]
WantedBy=multi-user.target

Let’s go over a few of the most important options related to Systemd and Prometheus. Restart — Configures whether the service shall be restarted when the service process exits, is killed, or a timeout is reached.
RestartSec — Configures the time to sleep before restarting a service.
User and Group — Are Linux user and a group to start a Prometheus process.
— config.file=/etc/prometheus/prometheus.yml — Path to the main Prometheus configuration file.
— storage.tsdb.path=/data — Location to store Prometheus data.
— web.listen-address=0.0.0.0:9090 — Configure to listen on all network interfaces. In some situations, you may have a proxy such as nginx to redirect requests to Prometheus. In that case, you would configure Prometheus to listen only on localhost.
— web.enable-lifecycle — Allows to manage Prometheus, for example, to reload configuration without restarting the service.

To automatically start the Prometheus after reboot, run enable.

sudo systemctl enable prometheus

Then just start the Prometheus.

sudo systemctl start prometheus

To check the status of Prometheus run the following command:

sudo systemctl status prometheus

Suppose you encounter any issues with Prometheus or are unable to start it. The easiest way to find the problem is to use the journalctl command and search for errors.

journalctl -u prometheus -f --no-pager

Now we can try to access it via the browser. I’m going to be using the IP address of the Ubuntu server. You need to append port 9090 to the IP.

<public-ip:9090>

If you go to targets, you should see only one — Prometheus target. It scrapes itself every 15 seconds by default.

Install Node Exporter on Ubuntu 22.04

Next, we’re going to set up and configure Node Exporter to collect Linux system metrics like CPU load and disk I/O. Node Exporter will expose these as Prometheus-style metrics. Since the installation process is very similar, I’m not going to cover as deep as Prometheus.

First, let’s create a system user for Node Exporter by running the following command:

sudo useradd \
    --system \
    --no-create-home \
    --shell /bin/false node_exporter

You can download Node Exporter from the same page.

Use the wget command to download the binary.

wget https://github.com/prometheus/node_exporter/releases/download/v1.6.1/node_exporter-1.6.1.linux-amd64.tar.gz

Extract the node exporter from the archive.

tar -xvf node_exporter-1.6.1.linux-amd64.tar.gz

Move binary to the /usr/local/bin.

sudo mv \
  node_exporter-1.6.1.linux-amd64/node_exporter \
  /usr/local/bin/

Clean up, and delete node_exporter archive and a folder.

rm -rf node_exporter*

Verify that you can run the binary.

node_exporter --version

Node Exporter has a lot of plugins that we can enable. If you run Node Exporter help you will get all the options.

node_exporter --help

— collector.logind We’re going to enable the login controller, just for the demo.

Next, create a similar systemd unit file.

sudo vim /etc/systemd/system/node_exporter.service

node_exporter.service

[Unit]
Description=Node Exporter
Wants=network-online.target
After=network-online.target
StartLimitIntervalSec=500
StartLimitBurst=5
[Service]
User=node_exporter
Group=node_exporter
Type=simple
Restart=on-failure
RestartSec=5s
ExecStart=/usr/local/bin/node_exporter \
    --collector.logind
[Install]
WantedBy=multi-user.target

Replace Prometheus user and group to node_exporter, and update the ExecStart command.

To automatically start the Node Exporter after reboot, enable the service.

sudo systemctl enable node_exporter

Then start the Node Exporter.

sudo systemctl start node_exporter

Check the status of Node Exporter with the following command:

sudo systemctl status node_exporter

If you have any issues, check logs with journalctl

journalctl -u node_exporter -f --no-pager

At this point, we have only a single target in our Prometheus. There are many different service discovery mechanisms built into Prometheus. For example, Prometheus can dynamically discover targets in AWS, GCP, and other clouds based on the labels. In the following tutorials, I’ll give you a few examples of deploying Prometheus in a cloud-specific environment. For this tutorial, let’s keep it simple and keep adding static targets. Also, I have a lesson on how to deploy and manage Prometheus in the Kubernetes cluster.

To create a static target, you need to add job_name with static_configs.

sudo vim /etc/prometheus/prometheus.yml

prometheus.yml

- job_name: node_export
    static_configs:
      - targets: ["localhost:9100"]

By default, Node Exporter will be exposed on port 9100.

Since we enabled lifecycle management via API calls, we can reload the Prometheus config without restarting the service and causing downtime.

Before, restarting check if the config is valid.

promtool check config /etc/prometheus/prometheus.yml

Then, you can use a POST request to reload the config.

curl -X POST http://localhost:9090/-/reload

Check the targets section

http://<ip>:9090/targets

Install Grafana on Ubuntu 22.04

To visualize metrics we can use Grafana. There are many different data sources that Grafana supports, one of them is Prometheus.

First, let’s make sure that all the dependencies are installed.

sudo apt-get install -y apt-transport-https software-properties-common

Next, add the GPG key.

wget -q -O - https://packages.grafana.com/gpg.key | sudo apt-key add -

Add this repository for stable releases.

echo "deb https://packages.grafana.com/oss/deb stable main" | sudo tee -a /etc/apt/sources.list.d/grafana.list

After you add the repository, update and install Garafana.

sudo apt-get update

sudo apt-get -y install grafana

To automatically start the Grafana after reboot, enable the service.

sudo systemctl enable grafana-server

Then start the Grafana.

sudo systemctl start grafana-server

To check the status of Grafana, run the following command:

sudo systemctl status grafana-server

Go to http://<ip>:3000 and log in to the Grafana using default credentials. The username is admin, and the password is admin as well.

username admin
password admin

When you log in for the first time, you get the option to change the password.

To visualize metrics, you need to add a data source first.

Click Add data source and select Prometheus.

For the URL, enter localhost:9090 and click Save and test. You can see Data source is working.

<public-ip:9090>

Click on Save and Test.

Let’s add Dashboard for a better view

Click on Import Dashboard paste this code 1860 and click on load

Select the Datasource and click on Import

You will see this output

Please check Part 3 from the below link for the K8 cluster integration with Prometheus and Grafana for monitoring

https://medium.com/@srinmuz/part-3-netflix-clone-app-setting-up-kubernetes-cluster-on-aws-ec2-instance-with-a-master-and-9c8a7330ba31

I will update the remaining parts for the complete CI/CD pipeline to install and configure the Netflix clone app.

Happy Learning!!!