solar What are the maintenance methods of household solar power generation system?

Maintenance methods of household solar power generation system include：

1.Overloading the system for a long time will cause the original circuit board to heat up and possibly damage the whole system. Please don’t long time overloading

2.Get the best charging effect. After the charging plug of the solar panel is inserted into the socket, according to the actual situation, adjust the irradiation angle of the solar panel facing the sun as much as possible so that it can be charged directly.

3.In order to improve the charging efficiency and reduce the charging loss as much as possible, please don’t put the solar panel on the hot ground.

4.To avoid any possible battery damage and battery leakage, please don’t invert and hit the system control box, and put it in a dry place for use and storage.

5. In order to avoid any possible damage, please press the switch lightly and plug various connectors in use. It is strictly forbidden to insert other electrical appliances into the special charging socket for small electronic products such as mobile phones. Pay attention to the changes of the display lights on the control box panel at any time. When the battery display lights turn red, please charge them in time before using them.

6. When in use, turn on the main switch of the system, then turn on the corresponding output switch, and turn off all switches during maintenance and when not in use.

7.In order to prevent the battery from being over-discharged due to long-term low current discharge, damaging the recharging performance of the battery and shortening the service life of the battery, please ensure to charge at least once every three months.

8. In order to avoid damaging the system, non-professionals are not allowed to disassemble the system without permission.