Login And Installation Of Wavlink Router Device

4 min readMay 15, 2023

The installation of the Wavlink router device via smart application means getting so many extra features of the device. To execute this process you will require only the device and access to its web browser. So, study this entire page to learn all the basic details.

Require A Few Things Wavlink Router Configuration

Must know the login information and default web or IP address.
Requires an active internet connection plan in an existing internet provider device.
Any WiFi gadget must have access to its web browser and Google Play Store.
Grab the vacant electrical power socket to plug in the Wavlink router.
Moreover, there is also a need for an ethernet wire to make a connection.

Access Wavlink Router Web Management Page

First, place the Wavlink router device power plug into the power socket.
After that, take the computer and connect it to the Wavlink router network.
Next, open Chrome and enter wifi.wavlink.com in the HTML bar.
Then, fill in all the Wavlink router login details.
In case you don’t know the Wavlink router login details then check the manual booklet which comes with the Wavlink router.

Configure Wavlink Router Device

Early, settle the Wavlink router device power plug it into the power socket and power it on.
Now, use your device to make a connection between it and the router.
Once the networking process is completed, launch the Google Play store on that device.
Next, find and pick up the Wavlink smart application.
Then, tap on the install button, and give all the permission to your device to install this.
After that, open the app and again give all permission to the app to begin the further process.
Following this, insert all the login details in the required fields and tap on the login button.
Further, completing both processes, immediately move to the setup process.
In order to do this, take the help from Wavlink app instructions and the Wavlink router quick manual booklet.
Here, make a new SSID and security password and modify the Wavlink router’s advanced settings.
In this way, the Wavlink router configuration process is done shortly.

Wavlink Router Installation Via WPS

Early, settle the Wavlink router power plug into the power socket.
Now, settle your router and modem device closer to each other to create strong connectivity.
Just keep in mind that don’t place your Wavlink router device near metal appliances.
Later, punch the WPS button of your Wavlink router device.
Next, push the modem WPS button and check the LED indication.
The WiFi-protected setup button will take a few minutes to finish the process.
Further, identify the device LED to confirm the connection.
Finally, connect your device to the network, once the process is done.

Causes Why You Face Wavlink Router Issues

Interrupted power supply from the electrical socket.
The modem internet connection is not working ideally.
Any trouble in wired or wireless internet connection.
Fill in the wrong login and web portal details of the Wavlink router.
Your Wavlink router device is getting in touch with metal or electronic appliances.
From the modem device, your router is placed too far.

Resolve Wavlink Router Issues

Change the placement of the router and place it near the modem.
Also, change the power outlet of both the modem and router.
If the existing wire is broken or damaged then change it with a new one.
Must enter the accurate login details.
Upgrade the software of the Wavlink router device.
Reset the Wavlink router device. (After reset you will need to do the configuration process again.)

Tip: If you want to extend the range of your router’s WiFi signal then you will require to purchase the Wavlink WiFi range extender.

Wavlink Extender Work

A Wavlink extender is a device used to extend the range of the existing router’s WiFi signal. After doing the Wavlink extender setup process, you enjoy a fast and reliable internet connection in all directions of the office and house. To enjoy the benefits of the Wavlink extender device, you need to do the Wavlink extender configuration process.

First, place the Wavlink extender device power plug in the power socket near the router device. After that, press the WPS button of the Wavlink WiFi range extender and within 10 to 20 seconds press the main router WPS button. Now, on both the extender and router gadget WPS LED starts blinking solid blue. As it means the Wavlink extender configuration process is completely done now.

With the help of the WPS method, the Wavlink extender setup process is successfully done now.

As of now, after the entire study of this page, you will be able to do the login and setup process of the Wavlink router, without taking help from technical support. You also learn the easy way to boost the range of WiFi signals by doing the Wavlink extender setup.