5 Ways To Maximize Your Dishwasher’s Performance
One of the most appreciated appliance in a kitchen is a dishwasher. It has come up as a boon for those who have quite a hectic schedule. All you need to do is cook, eat and load the dirty dishes in the dishwasher, leaving behind the worries of hand washing them. However, this luxury can end up soon if it stops working to its full ability, thereby, forcing you to rewash them. You need to pay a little attention for its maintenance, to maximize the performance. If this kitchen appliance isn’t working at all, consider calling an appliance repair technician Toronto.
Tips to follow to maximize dishwasher’s performance:
1. Don’t Rinse: Most people pre-rinse the dishes before loading them into the washer, that can waste thousands of gallons of water per household each year. Modern dishwashers are designed to handle heavily soiled dishes. It is advised not to pre-rinse them if you owe a modern one.
The best solution to maximize performance is to scrape the left over food from the dishes before placing them in the washer. This will save you with time and energy and even the quality of cleaning will increase.
2. Don’t Overload It: It’s quite a foolish act to load the dishwasher beyond its given capacity. In order to optimize water and energy, it’s advised to fill the racks till all the available space is filled, but remember not to overcrowd it. An overcrowded washer doesn’t allow the water to circulate properly. Hence, the result is partially cleaned dishes.
A dishwasher uses the same amount of water whether it’s loaded half or full. You can use the rinse and hold feature if it’s not completely filled. Running full wash cycles, maximize both the efficiency and cleaning power.
3. Choose the Correct Cycle: The cycle depends on the soil level of the dishes. If they are fairly clean, then consider choosing a shorter and lighter cycle with low temperature. If they are matted with food, choose a longer cycle with a high temperature for deep cleaning. Keeping the soil levels together results in better performance. Don’t use a heat cycle to dry the dishes. Instead, allow them to air-dry to save 15% of energy.
4. Check the Sprayer Arm: A sprayer arm is located in-between the top and the bottom tray. Before choosing a wash cycle, check to see if the tall utensils you placed in the washer aren’t blocking the sprayer arms. Also, monitor the holes in the arms to make sure there is no clogging. If there is clogging, use a toothpick to remove it. An unclogged dishwasher is able to perform at its maximum capacity. If you find any of the arms damaged, get them repaired or replaced soon by a dishwasher repair professional Toronto.
5. Clean regularly: In order to maximize the performance, it’s advised to clean it every week. Detergent residue and food deposits are among the items that may build up as a debris inside the washer. To remove them, add 1–2 cups of vinegar in it, and start the wash cycle.
These were the five tips which needs to be followed to maximize the performance of a dishwasher. If you are facing difficulty, even after following the above tips, then consider calling a professional. Appliance Repair Toronto, is a leading company that offers high quality home appliance troubleshoot solutions at affordable costs including dishwashers.
