A “micropile” can be called one of the piles that often comes across when a person wants to build a house, building, office, add to it or improve it, and if he really uses it, he needs to know how to choose. That’s how various types reduce the risk of household problems that may arise in the future. So how do we choose? This must be a question that requires an answer.
Choose a microstack according to the application.
1. What is the intended use?
First of all, we must answer for what purpose this type of accumulation was chosen. We will add a one-story house, build a two-story house, build a kitchen, build a garage, etc. When we know the purpose of doing it. It definitely helps to choose both sizes. Pilot types with different characteristics are more suitable.
2. Measure the area well.
Remember that it is best to measure the size of the area we will use for installation. See how wide, how long This is an approximate blueprint. can be added effectively Including investment Because if there is a large area of land, the cost will be high. But with a relatively small microstack size, no matter how tight the space is, it can be installed with confidence.
3. Number of available pilots
Once you know what size to use What pile do you use? You should also know all the important points. The amount must be large enough to meet the purpose of the installation. The number of columns has a positive effect on the initial cost estimate. In addition, the contractor must be consulted. or experienced engineer
4. The size and shape of the stick must be appropriate.
When selecting a micro pile (ไมโครไพล์,เสาเข็มไมโครไพล์), it must first be said that different sizes and types of piles can meet the needs of different uses. Currently there are many types of bets to choose from. Because there are square shape, round shape, I shape, I shape, etc., the size and shape match, can bear the load well.
5. Ground conditions for installation
The last is the state of the area before installation. we need to know in detail Because Thailand has a different soil structure, some posts are suitable for driving about 20–25 meters or up to 30 meters into the ground. Knowing the soil conditions, we can calculate the compaction efficiency of the hydraulic machine. Including cost estimates
While learning how to choose the right way to use a micropilot. In addition, choosing a good service source also promotes less household troubles, such as B. Narong Microspun Co., Ltd., which is a factory, trader and spinning service with high standards and safety at the same time. Skilled technicians provide careful advice and support. Bar types or sizes available depending on usage. The price is also very affordable.