High capacity waste tire recycling equipment from xinxiang huayin

Company Profile

Xinxiang Huayin Renewable Energy Equipment Co., Ltd is specialized in manufacturing waste management equipments since 1993. Our waste tire recycling equipment can be applied to recycle waste tyres/plastics/scrap rubber, the final product are: fuel oil (40%-45%), carbon black (30%-35%) and Steel Wire (10%-15%).

Different Models of Huayin waste tire recycling equipment

HY-D2600mm*L6600mm*1400mm:

1. This mode of waste tire recycling machine can load 10 tons of crushed tires or 12 tons of waste plastic.
2. After finishing one batch, with auto-feeder, you don’t need to wait the pyrolysis machine cooling down since workers will have to go inside to feed material. If you don’t have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste tires/ plastic go ahead.

HY-D2800mm*L6000mm*1400mm:

1. It can load 10 tons of waste tires or 12 tons of waste plastic.
2. The reactor adopts Q345R steel plant and its thickness is 16 mm, which can bear 500-750 batches.
3. We can also make reactor by material 310S+Q345R, which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel

HY-D2800mm*L6600mm*1400mm:

1. Working with Auto-feeder, it is able to contain 12 tons crushed tires or 10 tons whole tires.
2. For plastic, it can contain even 12 tons.
3. The diameter of feeding port is 1400mm.
4.After 2 hours feeding time, it’s time to heat the reactor by coal/wood/natural gas/crude oil. Generally speaking, when the temperature ups to 155 Celsius degrees around, the oil gas will generated.

Technology parameter

About delivery:

We will delivery the machine within 15 days after get the advance payment.

Pyrolysis machine instillation:

Our company will supply the foundation drawings to you customer after make the order. In addition, we will send experienced engineer when buyer get the machine. The engineer mainly install and debug the equipment for you.

How many workers needed?

4 workers are enough to operate one set pyrolysis machine.

Catalyst formula:

We will supply you our catalyst formula after you order the machine. In the future, you can buy them at your own country.

Profit analysis

3 to 5 months to recover cost

From Tire To Furnace Oil Process
Cost:
Raw material cost: USD / TON×10Ton= USD
Fuel material cost: USD / KG× KG= USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h USD/KW×20hours= USD
Worker’s salary: USD/Day×4Persons= USD
Profit:
Oil Profit: USD/Ton×4.5Ton= USD
Carbon black: USD/Ton×3Ton= USD
Steel wire: USD/Ton×1.5Ton= USD
Gross Profit:
Total profit USD － Total cost USD= USD From Furnace Oil To Fuel Oil Process
(If 10ton waste tires then 5ton capacity is enough for this link)
Cost:
Raw material cost: USD / TON×5Ton= USD
Fuel material cost: USD / KG× KG= USD
(Here you could have four different choices: 5000 kilocalorie Coal—500kg, Fuel oil—170-200kg, Natural gas—270-300cubic, Wood—700-800kg)
Powder consumption: Average 10KW/h USD/KW×20hours= USD
Worker’s salary: USD/Day×4Persons= USD
Profit:
Oil Profit: USD/Ton×4.5Ton= USD
Gross Profit:
Total profit USD － Total cost USD= USD