HP LaserJet Pro MFP M33FDW: Troubleshoot Printer Issues

How to troubleshoot HP Laserjet Pro MFP M227fdw Printer Issues?

The best and easy way to troubleshoot an HP printer is to get your HP printer service. Call 1–800–673–8163 to speak to an HP printer expert to get your printer serviced. Contact HP Technical Support Now!

Are you tired of handling troubles on your HP Laserjet Pro MFP M227FDW printer? This is the absolute right place to end all your problems related to the HP printers. We have mentioned below the most common issue being faced by various Laserjet models accompanied with their resolution. With the help of this guide, you will be in a position to fix your printer of your own.

Important Features of HP Laserjet Pro MFP M227fdw Printer

HP is a well-known and established brand in computers and related accessories around the globe and does not require any introduction. The HP Laserjet Pro MFP M227fdw is also one of the remarkable printers with great quality, speed, and color. HP products are always known in the market for their awesome quality and for delivering quality results.

Using HP Laserjet Pro MFP 227fdw Printer is super-easy due to its user-friendly mechanism. Laser printer prints at a great speed and can easily save time while getting your printing job done. However, being a machine, it also undergoes a few technical glitches which hamper its productivity and affect its performance. It can start malfunctioning and can give some errors. This is quite common with most printers. But, relax as we are here with detailed information along with solutions on how to handle those issues.

You can visit 123.hp.com/setup and can get updated HP printers drivers and firmware to resolve your printer problem. Here are the important tips on how to fix errors of the HP Laserjet Pro MFP M227fdw printer.

HP Laserjet Pro MFP M227fdw — Troubleshooting Printer Errors

Kindly go through all of this one by one and find out help to diagnose the error and troubleshoot accordingly.

Drivers not Installed

It is important to have the latest version of the software and drivers to be installed for your printers from the official website of HP. Keep in mind to choose the appropriate OS while installing the driver. Normally, the website is capable enough to automatically detect the operating system; however, it is always good to ensure the same second time prior to proceeding further for downloading the correct drivers.

In case, installation of drivers is interrupted in between, then try uninstalling the previously downloaded drivers and re-load the latest drivers. Visit 123.hp.com/setup and download the latest version of HP drivers and install them on your system.

Printer unable to Start

Here are the steps mentioned below to sort the issue if your HP Laserjet printer is not starting at all.

• Check carefully whether your printer is connected to the power source properly or not. This may happen due to a faulty power outlet or power supply not getting through properly in the power outlet. In this situation, you should change the power outlet and try to plug in your printer to another power source. You should also confirm whether the power cord is firmly inserted into the printer or not. A loose connection between printer and power cord may also give rise to these startup issues. Ensure that the power cable is absolutely fine and is not damaged or broken from anywhere.
• You also need to ensure that the USB cable connecting to the printer and computer should join both devices appropriately. Tighten both the ends of the USB cable once. Also check that USB cable should not be cut, faulty, broken, or damaged. Replace the damaged USB cable with a new one, Length of the USB cable being used should be enough to connect both the devices comfortably.
• One of the other reasons which may also lead to the non-starting of your HP Laserjet Pro MFP M22FDW printer is the damaged power button or defective power supply.

Jammed Paper within the Printer Slot

Look for the paper tray, automatic document feeder below tray 2 and check if there is any paper jam. Remove all stuck paper carefully from the printer.

Unable to Fed Paper Properly into the Printer

If your printer is displaying the message for paper jam and you cannot see any jammed paper in the printer. You also need to check for the papers which are loaded in the paper tray. These should not be folded, curved or streaked from anywhere. These may easily stuck in your printer and result in a paper jam. It is also important to load accurate size of paper in the paper tray.

49 Error

This is an error that your printer displays when the printer tries to perform an action that is not designed to perform in that firmware. The printer generally fails to perform such kinds of operations. This majorly happens due to two different reasons.

1. Unsupported Printer Commands
2. Environmental and interaction with the device

It is quite easy to resolve the above-mentioned problem. Turn your printer off. Disconnect your printer from all connections such as USB/wireless. Now, turn the printer back again. Wait for a couple of minutes to reach the printer in an ideal state. To check the proper functioning of the printer, try printing a configuration report. Also, check for the latest firmware, if required, download the latest by visiting the official website of HP.

Unsupported or Damaged Paper

It is an important part of your printer if you need smooth prints using your HP printer. Using faulty or unsupported paper will always create operating your HP printer. Folded, cut, streaked, inappropriate paper size may be rejected by your printer and may usually create paper jams. Sometimes papers absorb humidity due to which paper gets damped. Before giving the print command, remove these types of sheets. If you want to use these sheets, first you need to dry them in sun.

Opposite to mentioned above, keeping papers in a too dry environment also results in developing static electricity on them. In this situation, hold the sheets, flex them up and down to remove that static charge. Always make sure that only 250 papers should be used at a time. Avoid overloading the paper tray.

Too Dirty Rollers

On a timely basis, take a warm damp clean cloth fabric and remove all the dirt from the rollers. Rollers should be dirt and lint-free. Too smooth rollers indicate that it is time to change them.

Cannot Connect To A Wireless Network

This is the most frequent issue which occurs quite often occurs in wireless printers. Under this issue, wireless printer faces difficulties to establish a connection with the wireless network. in case required, you can restart your wireless router and your printer to re-establish the connection between them.

Printer Unable to Boot Up Completely

When your HP Printer is starting, however, it is not booting up completely or gets stuck at the white screen, you may try the below-mentioned steps:

The first and foremost step is to go for updating firmware. For a printer, to work smoothly, it is quite important to have the latest version of software, drivers, and firmware. In case, you are missing out on the updated version, visit 123.hp.com/setup to download the same.

Sometimes interference of external cable also may lead to the white screen of the printer. Hence when you are going to restart the printer, remove all unnecessary cables such as USB, ethernet, and fax from the printer.

Final Words

We expect that the above troubleshooting steps have helped you fix your HP Laserjet Pro MFP M227FDW printer. In case after trying these solutions, you still face issues with your printer, you should contact our HP printer experts right away. Our printer experts will help you find out the underlying cause of your printer issue and fix it asap with remote assistance.