If you are here this means that you have already got your hands on the Netgear AC1750 wifi mesh extender. This is the best choice as it provides tri-band wifi by increasing the internet speed and widening the network coverage. Via this blog, we will explain how you can do a Netgear AC1750 Extender Setup using the Netgear installation assistant. There are different ways in which you can set up your wifi extender but this blog focuses on the installation assistant.
How To Set Up Netgear AC1750 Using The Netgear Installation Assistant?
To connect your wifi range extender to your existing WiFi router network you can use the Netgear installation assistant. For using the NETGEAR installation assistant, follow the prompts listed below one by one carefully.
Step 1: Start by opening an internet browser on your PC device.
Step 2: Link your Netgear wifi extender to the main router network.
Step 3: Ensure your PC device can automatically get the IP address from a DHCP server.
Step 4: Associate the PC device to the Netgear mesh wifi extender with the help of wifi or ethernet cord.
Step 5: For Wifi connection;
- From the wifi-compatible PC device, go to the wifi settings.
- Here, click on the extender’s SSID i.e., NETGEAR_EXT, and connect the device to the extended network.
- After the connection is successful, the LED lights will become solid white.
Step 6: For wired connection;
- Take the ethernet wire and attach it to the ethernet port on the wifi extender.
- Then connect the other end to the ethernet port on the computer.
Step 7: Open the internet browser.
Step 8: Type the web address http://www.mywifiext.net and press enter button.
Step 9: The Netgear installation assistant will show up on your screen.
Step 10: Follow the on-screen prompts to connect the mesh wifi extender to the existing wifi network.
Step 11: After that, detach the wifi extender from its original location.
Step 12: Shift the extender to a new location that is mid-way of your wifi router and poor network recipient zones.
Step 13: Make use of the router link LED to select an optimal location for your wifi mesh extender.
Step 14: When the router link led is amber or green, that means the location is optimal, otherwise keep moving.
Step 15: Connect your PC device and the new wifi extender once again.
Netgear AC1750 Wifi Mesh Extender Ready To Roll!
That was all about the Netgear AC1750 Wifi Mesh Extender Setup via Netgear installation assistant. Just follow all the points carefully and you are done. Enjoy the extended signals in every corner of your house without having to move here or there for better internet. Tada!
