FORT COLLINS, US: Anyone who’s ever broken the ice off a windshield or anxiously viewed a plane get de-iced, pay attention: Colorado State University (CSU) scientists have developed an ice-repellent coating that outperforms today’s best de-icing products.
The team led by Arun Kota, assistant professor of mechanical engineering and biomedical engineering, scientists have invented an environmentally friendly, inexpensive, long-lasting coating that could keep everything from cars and ships to planes and power lines ice-free.
Their innovation is described in the journal Materials Chemistry.
This is a gel-based, soft coating made out of PDMS (polydimethylsiloxane), a silicone polymer gel with already widespread industrial use. Their experiments were supported by careful analysis of ice adhesion mechanics.
The performance measure of de-icing coatings is called ice adhesion strength — the shear stress necessary to remove ice from a surface — and is measured in kilopascals (kPa). Kota’s group demonstrated ice adhesion strength for their coating of about 5 kPa. By contrast, soft coatings available on the market have ice adhesion strength of about 40 kPa (lower is better). Other types of de-icing coatings made of rigid materials like Teflon typically perform at around 100 kPa.
And what about what’s sprayed on frozen planes before takeoff? Those are liquid de-icers, including ethylene glycol or propylene glycol, and they work pretty well. The spraying of salts or glycols is the most common passive de-icing technique used today; according to the EPA, more than 20 million gallons of de-icing chemicals are used per year by the aviation industry alone. But these liquid products leach into groundwater, raising environmental concerns. And they have to be applied over and over again.
De-icers vs anti-icers
De-icing coatings are not the same as anti-icing coatings. Anti-icers delay the formation of ice; de-icers facilitate easy removal of ice, once that ice has already formed and stuck to a surface, Kota noted.
The CSU discovery is an environmentally friendly, high-performance solution that could rid us of toxic liquid de-icers and keep ice from sticking to our windshields. It would be applied as a more permanent protective coating.
“We think there is significant commercial potential here,” Kota said.