Identifying hotspots on the Ethereum p2p network
In our journey of creating the ideal network topology for our Fiber nodes, we had to determine the critical geographical regions of the Ethereum p2p network. We will define these “hotspots” as regions where the most transactions are originally broadcasted from.
Because Fiber is a mempool service, we need to be able to deliver transactions to users as fast as possible, which also means making sure we sufficiently cover these hotspots. In essence, we want to make sure we’re as close to the original broadcaster is possible, which in p2p terms means either being directly connected to it, or only 1 or 2 hops away. Each hop will introduce a non-trivial amount of latency, which is something we need to minimize.
Let’s look at a couple scenarios:
In this setup, we’re 2 hops away from the transaction broadcaster. We’ll simplify here and assume that nodes always broadcast the full transaction message, which is not the case.
There are 3 factors introducing latency here:
- A: The first network hop.
- B: The time it takes this node to process, validate, and re-broadcast the transaction.
- C: The second network hop.
This network topology is not ideal, since your total latency will be A + B + C, and all of these steps have an element of variability to them.
What we actually want is the following, single hop topology:
Here, the only latency we have is A, the first and only network hop. The only way to achieve this is to try to connect to as much peers as possible in that region, which will give you a better chance of direct peerings with transaction broadcasters. You can do this by either having one node with a very large maximum peer count, or by having more than one node in the region. Because maintaining a large amount of peers is pretty resource intensive, we opted for the second option.
Now that we know why we need to cover these hotspots sufficiently, how do we identify them? This article will go over our findings.
The setup
The setup will consist of a number of Ethereum nodes deployed globally that keep track of when they received a certain transaction, but also from which peer it came. Later on, we’ll be able to inspect these timestamps to see which node heard about the transaction first. We’ll also be able to use the peer IP addresses to find which hosting providers are responsible for broadcasting the most transactions. But where do we deploy these nodes?
It’s no secret that most critical Ethereum infrastructure runs on AWS:
Which is why we deployed our nodes in the following 13 AWS regions:
- us-east-1 (N. Virginia)
- us-east-2 (Ohio)
- us-west-1 (N. California)
- us-west-2 (Oregon)
- ap-east-1 (Hong Kong)
- ap-northeast-2 (Seoul)
- ap-northeast-1 (Tokyo)
- ap-southeast-1 (Singapore)
- eu-west-1 (Ireland)
- eu-west-2 (London)
- eu-west-3 (Paris)
- eu-north-1 (Stockholm)
This obviously doesn’t cover the whole world, but since they’re located at backbone hotspots, it will do.
Each node will be connected to a significant amount of peers (400), for a theoretical maximum reach of 5200 peers. In practice, this number will be a lot lower due to duplicate peers. With this setup, we’ve recorded 5.5 million Ethereum transactions over the period of a couple of days. Let’s look at the results.
The results
Geography
Most transactions are seen first in the US in the North Virginia area, which is where the notorious us-east-1 AWS region sits. Ohio is a hotspot as well, seeing a little more than 8% of transactions first. Regions on the West Coast are less active: Oregon and North California combined only see a little more than 5% of transactions first.
In Europe, Frankfurt is by far the most active region. Paris and London are also important regions, both seeing close to 6% of recorded transactions first. In the Asia Pacific region, Tokyo and Singapore are the most active.
Interestingly, looking at the activity per “continent”, we can see that the EU and the US lead by a wide margin:
Based on these results, we’ve been able to work out a good geographical distribution of our node setup.
Hosting providers
Since we recorded the sending peer of every transaction, we can take a closer look at the different hosting providers that originate the most transactions. We know that AWS hosts a lot of full nodes, but is that actually where infrastructure that belongs to the largest transaction broadcasters is?
To figure that out, we’ll look at the top 3 most “active” peers (peers from which we received the most transactions first) per region, and identify the hosting provider based on their IP addresses.
us-east-1: Virginia region
All in AWS, Virginia.
eu-central-1: Frankfurt region
All in Hetzner, Frankfurt. Hetzner is a bare metal cloud provider that’s primarily active in Germany.
us-east-2: Ohio region
All in AWS, Virginia. Only the 4th biggest originated from the AWS Ohio datacenter, again confirming that the us-east-1 region is a big hotspot.
eu-west-3: Paris region
- Google Cloud, Brussels
- Google Cloud, Brussels
- Hetzner, Frankfurt
This seems to suggest that the Paris region itself is not very active.
eu-west-2: London region
- OVHCloud, London
- Google Cloud, Brussels
- Hetzner, Frankfurt
ap-northeast-1: Tokyo region
- AWS, Tokyo
- AWS, Virginia
- AWS, Tokyo
ap-southeast-1: Singapore region
- Contabo, Singapore
- Hetzner, Frankfurt (?)
- AWS, Singapore
eu-west-1: Dublin region
- AWS, Dublin
- AWS, Tokyo (?)
- AWS, Dublin
us-west-2: Oregon region
- Telus Communications, Vancouver
- AWS, Virginia
- AWS, Oregon
ap-east-1: Hong Kong region
- Google Cloud, Hong Kong
- Google Cloud, Hong Kong
- AWS, Virginia (?)
ap-northeast-2: Seoul region
- AWS, Seoul
- AWS, Seoul
- AWS, Tokyo
eu-north-1: Stockholm region
- Hetzner, Frankfurt
- AWS, Virginia (?)
- Hetzner, Finland
us-west-1: California region
- AWS, Virginia
- AWS, Virginia
- AWS, California
Turns out that AWS wins only in 6 of the 13 regions. In Virginia and in Ohio, both very important regions, it has been the biggest broadcaster. But we also see Google Cloud winning in Hong Kong as well as in Paris (from their datacenter in Brussels, Belgium). Hetzner wins in Frankfurt by a wide margin, perhaps not surprisingly. It also wins in Stockholm, Sweden, even though the broadcaster was in Frankfurt. This tells us that the eu-north area does not seem to have a lot of activity. Overall, Hetzner is a really active hosting provider in Europe. In Oregon, the biggest broadcaster was in Vancouver, Canada. In Singapore, it came from Contabo.
Another interesting observation is that there’s almost never one broadcaster that stands out per region. The second and third biggest broadcasters are never far behind. This suggests that providers like Alchemy and Infura, who send the largest part of Ethereum transactions, use a lot of nodes, possibly distributed across geographic areas.
You might have also noticed the slight anomalies tagged with (?). These are entries that don’t really make a lot of sense. The fact that an AWS broadcaster in Virginia can make the top 3 active peers of our node in Hong Kong means that those transactions didn’t arrive at our node in Virginia first. For now, we attribute these anomalies to the randomness of the p2p network, but we’ll continue looking into it.
Conclusion
When milliseconds matter, this is all information that has to be taken into consideration, and that’s what we did with Fiber. Listening to transactions is only one aspect of high frequency trading on blockchains, but it’s a very important one that one needs to get right by carefully choosing the regions, concentration, and cloud providers across which to deploy nodes.
If you’re interested in learning more about Fiber, check out the documentation or join the Discord. We will be posting more stories like these, follow us on Twitter for updates @chainbound_!