Be ready to CPU mine on Digibyte with RandomX and your Rock64 ARM with XMRig

David Léonard
Nov 4, 2020 · 7 min read
The Rock64 has a Quad-Core ARM Cortex a53 64-bit that you could easily be used to catch few more $DGB

Digibyte wants to bring back CPU mining implementing RandomX lowering more the barrier to mine Digibyte and get started without any kind of “commitment”. Be ready and prepare your ARM device to grab few more $DGB!

In one of the last stories we learned how to install your Rock64 and how to create a DigiByte Full node with a Rock64. Now you’re standing with this brand new node and wondering if you could make it mine some $DGB? Or simply, you just own a Rock64 and are wondering why it wouldn’t mine a bit, yes every coin count! Here is a small step by step guide.

CPU mining are you serious?

Why not? The Rock64 is powered by a Quad-Core ARM Cortex A53 64-Bit Processor, you have this amazing bit of technology just sleeping in this small box next to you. All this asset of silicon you paid good money for without using it… what a shame…

Make it mine !

And it is just so easy to make it mine, you are few commands away, so why not doing it? First just download the right dependencies:

sudo apt install -y build-essential cmake libuv1-dev libmicrohttpd-dev libssl-dev libhwloc-dev automake libtool autoconf
Installing the dependancies

Choose the best place to host your sources. In my opinion your home folder could be the right place. In the next commands, you’ll move into your home folder and simply download the XMRig sources. That will create for you an xmrig folder.

cd ~git clone
Cloning the XMRig sources

By default a donation to the XMRig’s devel team is set in the donate.h file. As we are CPU mining and won’t receive a lot of coin, you should disable this functionality. Edit the donate.h file located in the src folder to remove donation by simply using nano this way:

nano xmrig/src/donate.h

To remove automatic donations built into XMRig simply put a 0 at the end of those lines:

constexpr const int kDefaultDonateLevel = 0;constexpr const int kMinimumDonateLevel = 0;

Make a CTRL+X and Y to exit and save the file and you are good to go.

Put 0 at the end of those lines and save

So we are ready to compile, just follow those commands and wait for each one to complete:

cd ~mkdir xmrig/build && cd./ && cd ../buildsudo cmake .. -DXMRIG_DEPS=scripts/depssudo make -j$(nproc)
Screenshot taken during the build part
Screenshot taken during the cmake part
Screenshot taken during the make part

Change ownership on the folder you created

chown -R <name_of_your_user> ~/xmrig

is very important thing for almost all supported CPU mineable algorithms. With RandomX, you can earn until 50% increase in CPU mining hash rate by enabling Huge Pages on your device [2].

Please note 1280 pages means 2560 MB of memory will be reserved for huge pages and become not available for other usage.
You can use this command to make it temporary:

sudo sysctl -w vm.nr_hugepages=1280

If you want to make it permanent:

sudo bash -c "echo vm.nr_hugepages=1280 >> /etc/sysctl.conf"sudo bash -c "echo kernel.shmmax = 2684354560 >> /etc/sysctl.conf"sudo bash -c "echovm.hugetlb_shm_group = 0 >> /etc/sysctl.conf"

Test it

If you want to test it to be sure that you’ll be ready when RandomX will be available, you can create a Monero Wallet and test it against a miningpool of your choice or you can also test it with my address to test it if you want :

sudo ./xmrig -a randomx -o stratum+tcp:// -u 42SNM6kfbbD697cBmv67jddCymSyVpq6bK5iVooghJzY1xEfH5eyj9vHeeu5acpQDGLmnjGgJeNewWfTKAd19A1b61PZDnW+25000
Mining Monero to test that RandomX is working on your Rock64

Benchmark the perf of your Rock64

This simple command will let you benchmark the CPU mining performance of your Rock64

sudo ./xmrig --bench=1M --submit

It will take few hours to complete and return you a link to wit all your results. If you want to compare yours with mine, here is my link.

Benchmark result on

Create the config.json file

The config.json file will set your CPU miner for you whenever you launch it. Just create a file called config.json in the same folder of the app xmrig and insert the following lines.

cd ~/xmrig/build
nano config.json

To finish, just save with CMD+X and CMD+Y.

Overclocking the Rock64

Beware this part is for information and testing only, keep in mind that you can break your board depending on what you’re asking it for or if it overheats. Use it with caution and buy a heatsink.

By default your Rock64 has a max CPU frequency set to 1.3GHz max. Check your current CPU frequency with:

cpufreq-info -c 0
Actually this Rock64 can go up to 1.30GHz

No need to reboot, we can slightly bump this settings while mining to 1.51GHz using these commands:

sudo sed -i "s/MAX_SPEED=.*/MAX_SPEED=1512000/" /etc/default/cpufrequtilssudo systemctl restart cpufrequtils

Now the Rock64 can increase itself its CPU frequency up to 1.51GHz if it needs it.

Now the Rock64 can run at 1.51GHz

You can directly notice the bump in KH/s (about 15% more hashes)

If you want to try different settings, you can get the list of the accepted frequencies by using this command:

cat /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies
Rock’s available scaling frequencies

If you like to go back to the previous settings, just use these commands (beware to replace the “ with the right quotation mark

sudo sed -i "s/MAX_SPEED=.*/MAX_SPEED=1296000/" /etc/default/cpufrequtilssudo systemctl restart cpufrequtils

Check the temperature of your Rock64

You can check the CPU temperature with this command:

sudo armbianmonitor -m
87.7°C is too hot for you CPU, you better aim for 79°C max

I don’t have a big enough heatsink on my CPU and the 1512000 max-speed setting was a bit too much, so I did choose 1392000 setting which my Rock64 seems to appreciate much more.

Graphically monitor your Rock64 with SSH and s-tui

s-tui is a terminal, graphical User Interface for monitoring your computer.It allows monitoring CPU temperature, frequency and utilization. It is developed in Python and also requires minimal resources and it is possible to run it through a SSH connection.

It is pretty straightforward to install, just enter these commands to install and detect the sensors:

sudo apt-get install lm-sensors
sudo sensors-detect

Say yes to all questions and carry on with these commands that will install s-tui:

sudo apt-get install python3-pip stress
sudo apt-get install python3-dev
sudo -H pip3 install — upgrade setuptools
sudo -H pip3 install ez_setup
sudo -H pip3 install s-tui

Now it has been installed, to launch it:

sudo s-tui

If you want to have all the information, you have to run s-tui with sudo.

Too bad the Rock64 has no Power sensor



Coinmonks is a non-profit Crypto educational publication.

By Coinmonks

A newsletter that brings you week's best crypto and blockchain stories and trending news directly in your inbox, by Take a look.

By signing up, you will create a Medium account if you don’t already have one. Review our Privacy Policy for more information about our privacy practices.

Check your inbox
Medium sent you an email at to complete your subscription.


Coinmonks is a non-profit Crypto educational publication. Follow us on Twitter @coinmonks Our other project —

David Léonard

Written by

IT Guru • Defender against the Digital Dark Arts🛡 • Blockchain Advocate 🔑️.


Coinmonks is a non-profit Crypto educational publication. Follow us on Twitter @coinmonks Our other project —

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store