How to Get Started with a TV Antenna

A good cord cutting house wouldn’t be complete without the ultimate in cord cutting: an antenna. Before internet killed the video star and before cable was ubiquitous, the antenna was the original way to get television in your home, and today its popularity is rising again.

If you’re old enough to remember what antenna life was like before HDTV, if you received the channel, it would come in clear and you’d have no issues. However, if a channel didn’t come in clear enough, you’d still be able to see the channel, it just would have some static on the picture and would get a little fuzzy.

The good news is today with a clear signal, channels over-the-air are in high definition so they will look just as good as cable, and often times better since you are getting the signal directly from the source. Unfortunately, if the channel doesn’t come in clear enough, if you’re lucky you’ll get what looks like stuttering and audio cut outs, and at worse you’ll get nothing at all. Today’s broadcasting technology is called ATSC 1.0, and is a little finicky unless you are close enough to the broadcast transmitters. More than your home being in a good location, you have to think about what antenna you are purchasing and where it will be placed. Here are some tips and pointers to get started with an antenna.

1. Find Your Local Broadcast Towers

There are also plenty of apps on iOS and Android that can point you in the direction of the broadcast towers in real time to help you position the antenna optimally.

2. Find the Right Antenna

If you live far enough away from the broadcast transmitters, you will want to look into a more expensive antenna. But even if you do live close enough to the broadcast towers and you don’t mind spending a lot on an antenna, no one will fault you if you go overkill with an antenna. You may need to try different styles of antenna to find the right one, so try to buy one from a place with a good return policy.

Just as important as finding the right antenna is…

3. Find the Right Location for your Antenna and Auto Scan for Channels Until You Find the Right Place

4. Figure Out a Way to Watch

If you are savvy with wiring, you can hook your antenna up on your roof or in your attic and send that cable wire down to your cable splitter, where that signal goes to all the TVs in your house connected to that wall coaxial cable.

If that isn’t possible in your scenario, or you want a smarter way to watch, you can place your antenna wherever it works best and use a smart TV tuner. A smart TV tuner takes the signal from the antenna, and turns those channels into something a smart device can stream. Plus, it gives you a program guide, and many can be setup for DVR use. Click the link here to see a list of my favorites to help.

5. Enjoy and Stay Alert

You may have heard that some local stations are involved in a “Broadcast Spectrum Repack,” or simply you may have heard them ask you to rescan your channels. That’s because with digital TV, a station can look like it is broadcasting on a particular channel, but it’s actual number on a completely different channel. Take for example WCBS-TV in New York. On TV, the channel you see called the virtual number is 2, but the actual digital number it is broadcasting on is 36. Occasionally, the FCC requires TV stations move to a different digital number to provide more bandwidth for other wireless needs. So, although channel 2 doesn’t change, the digital number it transmits at does. Meaning the digital channel your TV is looking for no longer exists. Fortunately, with an auto scan on either your TV or smart TV tuner device, it will find it right away. On some TVs, you can enter the digital channel, and it will be able to find the channel and display the virtual number. Completely confused? Don’t worry, this doesn’t happen all that often, so just be aware if you can’t get a channel that normally came in with no fuss now suddenly won’t tune at all, try an auto scan.

Also, if you are using a smart TV tuner, you just have to make sure that is staying updated so it will continue to work on all your devices. However, that is something that is done automatically, so not too much work there to do.

A Long-Term Thing to Look Out For

Luckily in the next few years we will see the introduction of ATSC 3.0 to many areas in the United States (don’t ask me why they skipped 2.0). ATSC 3.0 will be much more forgiving when getting a signal, meaning we may see the return of portable televisions again. Plus, it will have the ability to connect to the internet to deliver interactive content, similar to video-on-demand from cable TV. It also will allow for 4K content to be delivered over-the-air, and other great features. Unfortunately, it also means that any current ATSC 1.0 TV or smart TV tuner will be completely incompatible, so you will need to either get a new TV or new smart TV tuner that supports ATSC 3.0.

At this moment in time, ATSC 3.0 is only available in few cities, and those cities are still broadcasting an ASTC 1.0 signal, so don’t worry too much. ATSC 3.0 is still years and years away so don’t go too crazy upgrading any equipment just yet.

Other than that, once you pay for the antenna and equipment, you’re watching television for free! Enjoy the freedom that is over-the-air television.

I’m a communications major passionate about technology, video production, and how the world works. http://anthony.guidetti.me

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store