Optimising Redis storage, part two
Posted by Julien Letessier on Thursday, January 19, 2017
Counting unique users, checking if a credit card has already been used, or checking if this is a mobile user’s first visit ever — all of these require maintaining a large set of fingerprints (unique visitor ID, card fingerprint, IDFVs depending on the use case).
Because this usually needs to be queried very rapidly, Redis is naturally our store of choice. While using its
SET
feels obvious, what data structure to select? Are there memory/performance compromises?This shows that while plain key/value is a safe bet, there are possible optimisations with hashes and traps to avoid with sets and sorted sets.
In a previous article we investigated how best to store a large key-value dataset (user sessions). We showed that number of partitions can have a huge effect on memory usage, but didn’t look at the other structures or how it affected performance.
The size of this set is driven by the fact session key and data are roughly 43 bytes, and that it grows with the number of monthly active users.
For this new use cases, we’re looking at identifiers that are typically smaller (128-bit UUIDs, or 16 bytes) with no payload (associated data); it’s also a dataset that grows with time, not just with current usage — so storage constraints are slightly different: smaller unit data, but kept essentially forever.
Why do this
One of Redis’s most awesome features, besides it’s speed and well-designed data structures, is that it documents algorithmic complexity for every single call. For instance: we know that adding to a hash is O(1) and adding to a sorted set is O(log n).
What Redis does not document, however, includes
- memory storage costs for each data structure, and
- relative cost of different calls (because not all O(1)’s are equal).
Aside from the stated use case, this exploration is about lifting this mystery for a few of the most commonly-used Redis data structures.
Data structures: options
We assume the identifiers we want to store are 128-bit random numbers. The key use cases we consider is:
Check if a given identifier is in the set of known identifiers, and add it if it isn’t.
Because this is an operation that will happen often, and the set will be large very rapidly, we want this to be a single Redis operation, commonly called a CAS (check-and-set).
The options we’re considering are:
1) Store flat keys.
For a given ID 0001aaaa0002bbbb0003cccc0004dddd
, we store the value 1 at key bench:flat:xx:{id}
.
The xx
is to mimic partitioning in other data structures, so that the keys in the “flat” option are comparable in length (more below).
Our CAS query is implemented with SETNX
.
2) Use Redis hashes
A stored ID is persisted by setting a field to 1 in a hash. The data is partitioned into 2^n hashes, by taking the low n bits of the ID and using it as part of the hash’s key. For example, with n = 12 (4,096 partitions), our example ID is persisted by setting field 0001aaaa0002bbbb0003cccc0004d
of hash key bench:flat:12:ddd
to the value 1.
CAS is implemented with a single HSETNX
.
3) Use Redis sets
Similar to hashes, except to associated value is needed.
For 4,096 partitions, the example ID is persisted by adding the value 0001aaaa0002bbbb0003cccc0004d
to the set named bench:set_:12:ddd
.
CAS is implemented with SADD
(which does return the number of items added).
4) Use Redis sorted sets
Similar to hashes again.
For 4,096 partitions, the example ID is persisted by adding the value 0001aaaa0002bbbb0003cccc0004d
to the sorted set named bench:zset:12:ddd
, with the associated score of 1.
CAS is similarly implemented with ZADD
.
Benchmarking
We prepared a benchmark driver that explores the possible data structures and number of partitions — storing all IDs in a single structure at one extreme, and storing each ID in its own structure at the other.
The code for the benchmark driver is here; the graphs presented are from this spreadsheet.
We found that the behaviours described below were completely similar with 1, 5, 10, or 20 million million IDs, so for simplicity (and to avoid unseemly 3D graphs) we’re only plotting results for 10 million IDs here.
Memory usage
The “flat” storage scheme uses consistent memory, which is expected: the number of keys and key size are identical, and “partitioning” here is really just rearranging characters in keys.
At low partition counts (ie. more IDs stored in a single structure), hashes, sets, and flat keys use up roughly the same amount of memory (within 10% difference), while sorted sets use 75% extra memory.
The right-hand side (many partitions, few IDs per partition) exhibits 2 interesting behaviours: first the memory usage for hashes and zsets massively improves, then degrades as we converge towards a single ID per structure.
Even more interestingly, for 128k partitions, the total memory usage is within a hair of the theoretical minimum (320MB to store 10 million 32 byte IDs).
Let’s revisit this chart’s axes to detail these behaviours. The next chart presents the same data, but focusing on overhead per ID, rather that total memory usage. Overhead is simply the memory used per ID, minus the minimum size to store an item (32 bytes).
On the leftmost side, the difference between the curves gives us a measure of the memory cost per data structure entry. Two interesting conclusions:
- Each key uses up 63 bytes of memory (the graphs reports 78 bytes, from which 15 is part our key name:
bench:flat:xx::
+ 32 bytes of ID). HASH
andSET
consume 70 bytes per element.ZSET
consume an extra 122 bytes per element (including 8 bytes for the per-element score)
At the right, the difference measure the memory cost of a single data structure (because each now hold a single ID). From which we deduce:
- Each
HASH
andZSET
consumes roughly 37 bytes (when ziplist’d), on top of the base key usage. - Each
SET
consumes a whopping 194 bytes.
This leaves the improvement in memory usage that starts at 512 IDs per hash and 128 IDs per sorted set.
This phenomenon is due to Redis reverting to simpler structures (called “ziplists” or “zipmaps”) when a data structure contains fewer than a (configurable) number of items.
In practice, and with the default settings, a hash containing fewer than 512 elements will be stored as a flat list. This does mean that queries (in particular, our CAS query) will revert from O(1) to O(n)… but with a n that is constrained to be small.
Unfortunately, this effect gets negated if the partition counts becomes too high, as the memory cost of having more keys makes up for the efficient ziplist encoding.
Querying performance
Different data structures, even if quoted at O(1), might have different performance when queried: constant operation time might mean a constant 1ms or a constant 100ms, after all.
Using the same dataset, we benchmark throughput for two scenarios: CAS hits (trying to add an ID that’s already in the set), and misses (the converse).
Caveats:
- the measurements below typically have a ±6% margin of error.
- we used a single-threaded Ruby driver for these, which means the driver overhead is factored in and probably masks a significant portion of Redis performance.
We did make sure that the time spent in the driver is identical for each scenario and for each type of data structure, so that any difference can still be compared.
- Flat keys, as expected, provide consistent hit throughput.
SET
throughput provides consistent performance, and is 5% slower than flat keys.HASH
is also consistent, and 10% slower than flat keys.ZSET
is more noisy and less consistent; from 10% slower when ziplist encoding gets used to 20% slower otherwise.
For CAS misses (ie. writes), performance is generally 15% lower.
- Flat keys still behave consistently.
SET
is 1 to 3% slower than flat keys on average.HASH
is exactly as fast as flat keys to large hashes, but plummets to 15% slower when using ziplists close to the limit (i.e. with 128 to 512 items per partition).ZSET
’s theorectical O(log n) behaviour finally rears its head, with 25% lower throughput on larger sets.
Closing thoughts
Our conclusion on storing large sets in Redis is twofold:
- Flat keys, sets, and hashes have very comparable performance and memory usage when low partitioning is used.
If the purpose is to enabled partitioning/clustering without much concern for overall memory usage, we recommend usingSET
with few partitions (256 would typically be convenient):SET
is conceptually a better match, and a lower number of keys is more practical for monitoring, and faster when restoring backups. - Ziplists create a sweet spot for
HASH
(“intlists” create another forSET
, which we have not explored here). It can be a technique worth exploring when memory usage is critical, for huge datasets when the unit datum is of a similar order of magnitude as the key size — and importantly, where the size of the set is known to stay within 1 order of magnitude.
In our case, this approach would be possible to reduce storage size by 65%; this comes at a moderate performance cost.
Of course, work here is incomplete. Instead of storing our IDs as hexadecimal strings, we could have halved storage by using binary packing — but that’d have made our examples unreadable.
Another avenue that might be worth exploring is using Redis as the storage for a Bloom filter, for use cases where a probabilistic data structure is sufficient. In theory, such a filter would only consume 80MB of memory for a set with 1-millionth false positive rates (a 90% reduction over our “exact” approach).
While reasonably realistic, this benchmark is still a benchmark and not behaviour in a production system, but hopefully will help you understand Redis behaviour a little better, as it did for us!
Originally published at deliveroo.engineering on January 19, 2017 by Julien Letessier:
I’m a software geek: I build things with code, like web applications, platform tools, search engines, or even tiny crypto utilities. I’ve previously had fun as an engineer, scientist, architect, manager, and start-up founder.
These days I mostly help other people building software here at Deliveroo!