How To Maintain Your DeWalt Power Drills
DeWalt has a reputation for building rugged and durable power drills that can be used both on the toughest jobsites, and for demanding home renovations. In addition, their power tools come with a 90 day money back guarantee, a free one year service contract, and a three year limited warranty. However, if you take care of your drill, there’s a pretty good chance you’ll never have the opportunity to discover just how good their warranty program is.
Even the highest quality tools will eventually fail if they don’t receive proper maintenance – that’s why you’ll hear many seasoned contractors repeat the timeworn adage “take care of your tools and they’ll take care of you.” When someone depends on their tools to make a living, a tool that stops working may mean losing out on a day’s pay. While you may only need your DeWalt tools for DIY weekend projects, it can still be frustrating to be all set to start only to discover your drill is on the fritz. These maintenance tips for tools such as the DCD760KL Cordless Drill and the DCD970KL Cordless Hammer Drill should make sure they’re ready when you are.
How To Keep Your DeWalt Cordless and Cordless Drills In Tip-Top Shape
These easy tips should keep your drills in good operating shape and ready for any project on your schedule:
1. Keep your drills in a dry place
Drills and actually most DeWalt tools do not get along with water. Because water can quickly rust the chucks and inner parts, including the motor, you should store your drills up on a shelf or on a workbench that is away from any moisture.
2. Use sharp bits
It only stands to reason that a sharp bit goes through the material that you’re drilling faster and easier, but it also puts less strain on the drill itself.
3. Allow a heated drill to cool
Even though DeWalt tools are built tough, they sometimes need a break. If you’re drilling through a particularly tough material or using it for long periods of time, don’t allow it to overheat – take a break once in a while. It may help you as well.
4. Clean your drill after extended use
Most DeWalt drills have an enclosed case, but there are ventilation slots that shouldn’t be allowed to clog – use a shot of condensed air to keep these free of debris and wood chips. You should also inspect the tool’s outer casing for cracks, the insulation on the power cord for tears (if applicable), and put a shot of lubricant on the chuck.
5. Keep your drill off the ground
If working on an outdoor project, keep your drill up off the ground where dirt and grass clippings might work their way inside the casing. If there’s a chance of thunderstorms or rain and you might not have time to gather all your tools, it can be a good idea to have a sheet of plastic or a tarp close by and ready for use.
Always read the operating manual supplied with your DeWalt tool as there may be maintenance instructions for the specific model you purchased and there should also be directions on how to get your drill serviced if more than routine maintenance is needed.
