I Made a Tiny Town and So Can You: 3D Printing My Future Apartment
“Hey, wouldn’t it be cool if you modeled and 3D printed your apartment to figure out where all the furniture will go?”
A tongue-in-cheek question from a coworker turned out to be one of the greatest nerd snipes I have ever fallen victim to. For the next several weeks before I moved into a new apartment, I worked nights and weekends putting together an accurate 1:25 scale model of the space. The new apartment was smaller than my previous home, and I needed to supply my own furniture. Because of the small room sizes and awkward wall angles of the new place, I was struggling to figure out how to arrange everything.
By modeling and 3D printing the apartment and furniture, I determined the layout and what furniture to buy before I moved. Thus, “Tiny Town”, as I later dubbed it, was born.
Modeling the space
The first step was to measure everything in the apartment — the dimensions of each room, as well as the locations of doors, windows, and radiators. Using a CAD program, I recreated the layout of the floors and walls using 2D sketches. I chose to use OnShape, a freemium cloud-based CAD software, primarily because I wanted to learn a new program, but any parametric CAD software should do the trick. From those 2D sketches, I then created 1:25 scale drawings which could be exported as DXFs.
With scrap cardboard, I laser cut the floor and walls, using a lower power etch to mark where the walls would bend. By making the walls all one piece, I reduced the amount of gluing necessary later.
Exterior corners are easy to etch using the laser cutter, but interior corners are a bit trickier. Since you can only laser cut one side, you need to denote the location and then make the cut using a hobby knife on the other side. For interior angles, you’ll also need to account for the thickness of the cardboard. If you don’t have a laser cutter, you can also cut the cardboard by hand, using the drawing prints as stencils. Hot glue works well to assemble the walls.
Printing the furniture
While simple boxes would have sufficed, the extra detail really brings Tiny Town to life. After modeling the first few pieces of furniture, I became pretty efficient at making knobs, handles, shelves, and door seams. Because I was printing the parts on a Form 2, I knew that it could produce these small details. An advantage to SLA over FDM, the printer can resolve features on the order of hundreds of microns — such as cabinet doors and shelves.
First, I went home and measured all of the furniture that I was planning to take to the new apartment. Then, using specifications from the vendors’ websites, I found measurements for all of the furniture I was considering buying.
From these measurements, I created CAD models. I hollowed each model such that they had 3–5 mm thick surfaces when scaled down to 1:25 for printing. After exporting as .STL files, I imported the models into PreForm to prepare them for 3D printing.
While some of the models could be printed flat without support structures, I rotated most of the models by 12º along both the X and Y axes and generated support structures with the default parameters. I tightly packed the build area and used grey resin for all of the furniture for a simple aesthetic.
Arranging Tiny Town
Once I had printed all of the furniture, I could begin arranging it. Could I have done all of this purely in CAD? Of course, but it would have been way less fun.
After trying several different arrangements, I finally settled on a layout where everything fit comfortably. As a bonus, I used a (paper) printer to print all of my paintings and rugs in the same 1:25 scale. At the end of the day, I was confident about which furniture to order for the new apartment, and I could sleep easy knowing it would all fit.
With Tiny Town on my workbench in a heavily trafficked area of the office, I received lots of feedback from my co-workers. One question one consistent from person to person: “Can you go one level deeper?”. If I were to take Tiny Town home to my new apartment, it would make sense for me to print a Tiny Town for my Tiny Town—a highly detailed part just 20mm x 8mm in area. This sort of print would be one of the rare instances to use 25µm layer height for general purpose resin, resulting in a 158 print. The Form 2 performed splendidly, and the Tiny Tiny Town was a success with most of the features resolved.
More than anything, this project demonstrates how quickly one can take an idea and turn it to reality with 3D printing. The speed and simplicity in which I went from idea to CAD to physical model is noteworthy. Each print of about a dozen items took 5 minutes to set up, several hours to print, and then half an hour (mostly idle time) to clean. I spent very little time finishing the parts, but sanding and painting would add another layer of realism to the models. While arranging for simple apartment moves may not be worth the time and resin, the potential for quality architectural scale models is very real.
🐌
