How to Set Up Continuous Integration for Monorepo Using Buildkite

Subash Adhikari
Mar 23 · 9 min read

Monorepo is a single repository that holds all code and multiple projects in a single git repository. Monorepo setup is quite attractive to work with because of its flexibility and ability to manage various services and frontends in one single repository. It also eliminates the hassle of tracking changes in multiple repositories and updating dependencies as projects change.

On the other hand, monorepo also comes with its challenges, specifically with Continuous Integration. As individual sub-projects within the monorepo changes, we need to identify which sub-projects changed to build and deploy the changed ones. This post presents a step by step guide to:

  1. Configure the Continuous Integration for monorepo in Bulidkite.
  2. Deploy Buildkite Agents to AWS EC2 instances with autoscaling.
  3. Configure Github to trigger Bulidkite CI pipelines.
  4. Configure Buildkite to trigger appropriate pipelines when sub-projects within a monorepo change.
  5. Automate all of the above using bash scripts.

Pre-requisites

  1. AWS account to deploy the Buildkite agents.
  2. Configure AWS CLI to talk to AWS Account.
  3. Buildkite account to create continuous integration pipelines.
  4. Github account to host the monorepo sourcecode.

The complete source code is available in buildkite-monorepo in Github.

Overview of setup

The Buildkite workflow consists of Pipelines and Steps. The top-level containers for modeling and defining workflow are called Pipeline. Steps run individual tasks or commands.

The following diagram lists the pipelines we are setting up, their associated triggers, and each step that the pipeline runs.

Pipeline and triggers

Pull Request Workflow

Pull Request Workflow
Pull Request Workflow

The above diagram visualizes the workflow for the Pull Request pipeline. Creating a new Pull Request in Github triggers the pull-request pipeline in Buildkite. This pipeline then runs git diff to identify which folders (projects) within the monorepo changed. If it detects changes, then it will dynamically trigger the appropriate Pull Request pipeline defined for that project. Buildkite reports back the status of each pipeline back to Github status check.

Merge Workflow

The Pull Request is merged when all status checks in Github pass. Merging Pull Request triggers the merge pipeline in Buildkite.

Merge Workflow
Merge Workflow

Similar to the previous pipeline, the merge pipeline identifies the projects that have changed and triggers the corresponding deploy pipeline for it. Deploy pipeline initially deploys changes to the staging environment. Once the deployment to staging is complete, production deployment is manually released.

Final project structure

.
├── .buildkite
│ ├── diff
│ ├── merge.yml
│ ├── pipelines
│ │ ├── deploy.json
│ │ ├── merge.json
│ │ └── pull-request.json
│ └── pull-request.yml
├── bar-service
│ ├── .buildkite
│ │ ├── deploy.yml
│ │ ├── merge.yml
│ │ └── pull-request.yml
│ └── bin
│ └── deploy
├── bin
│ ├── create-pipeline
│ ├── create-secrets-bucket
│ ├── deploy-ci-stack
│ └── stack-config
└── foo-service
├── .buildkite
│ ├── deploy.yml
│ ├── merge.yml
│ └── pull-request.yml
└── bin
└── deploy

Set up project

Create a new git project and push it to Github. Run the following commands in CLI.

Set up Buildkite infrastructure

  1. Create a bin directory with some executable scripts inside it.

2. Copy the following contents into create-secrets-bucket.

Generate SSH Key and copy it to S3 bucket

The above script creates an S3 bucket that is used to store the ssh keys. Buildkite uses this key to connect to the Github repo. The script also generates ssh key and sets its permission correctly.

Run the script

running create-secrets-bucket script

The script copies the generated public and private keys to ~/.ssh the folder. These keys can be used later to ssh into the EC2 instance, running the Buildkite agent for debugging.

Next, verify the bucket exists, and the keys are present in the new S3 bucket.

Navigate to https://github.com/settings/keys, add a new SSK key, then paste the content of id_rsa_buildkite.pub .

Deploy AWS Elastic CI Cloudformation Stack

Folks at Buildkite have created the Elastic CI Stack for AWS, which creates a private, autoscaling Buildkite Agent cluster in the AWS. Lets, deploy the infrastructure to our AWS Account.

Create a new file bin/deploy-ci-stack and copy the content of the following script in it.

You can get the `BUILDKITE_AGENT_TOKEN` from the Agents tab in Buildkite Console.

Next, create a new file called bin/stack-config. Configuration in this file overrides the Cloudformation parameters. The complete list of parameters is available in the Cloudformation template used by Elastic CI.

On line 2, replace the bucket name with the bucket created earlier.

Next, run the script in CLI to deploy the Cloudformation stack.

The script will take some time to finish. Open up the AWS Cloudformation console to view the progress.

The Cloudformation stack would have created an Autoscaling Group that Buildkite will use to spawn up EC2 instances. The Buildkite Agents and the builds run inside those EC2 instances.

Create build pipelines in Bulidkite

At this point, we have the infrastructure required to run Buildkite ready. Next, we configure Buildkite and create some Pipelines.

Create API Access Token at https://buildkite.com/user/api-access-tokens and set the scope to write_builds, read_pipelines and write_pipelines. More information about agent tokens is in this document.

Ensure the BUILDKITE_API_TOKEN is set on the environment. Either use dotenv or export it to the environment before running the script.

Copy the contents of the following script to bin/create-pipeline. Pipelines can be created manually in Buildkite Console, but it is always better to automate and create reproducible infrastructure.

Make the script executable by setting the correct permission (chmod +x). Run ./bin/create-pipeline -h in CLI for help.

The script uses Buildkite REST API to create the pipelines with the given configuration. The script uses a pipeline configuration defined as json document and posts it to the REST API. Pipeline configurations live in .bulidkite/pipelines folder.

To define the configuration for pull-request pipeline, create .buildkite/pipelines/pull-request.json with the following content.

Next, create ./buildkite/pipelines/merge.json with the following content.

Finally, create .buildkite/pipelines/deploy.yml with the following content.

Now, run the ./bin/create-pipeline command to create a pull-request pipeline.

Copy the Webhook url from the console output and create a webhook integration in Github. The webhook URL is available in pipeline settings in the Buildkite console if needed in the future. We need to configure webhook only for pull-request and merge pipeline. All other pipelines are triggered dynamically.

Navigate to the Github repository Settings > Webhooks and add a webhook. Select Just the push event then add webhook. Repeat this for both pipelines.

Now in Buildkite Console, there should be two newly created pipelines. 🎉

Next, add Github integration to allow Buildkite to send status updates to Github. The integration is only required to be set up once per account. It is available at Setting > Integrations > Github in Buildkite Console.

Next, create the remaining pipelines. These pipelines will be dynamically triggered by pull-request and merge pipelines, so we do not need to create Github integration.

The Buildkite Console should now have all the pipelines listed. 🥳

Set up Buildkite Steps

Now that the pipelines are ready configure steps to run for each pipeline.

Add the following script in .buildkite/diff. This script diffs between all the files changed in a commit against the master branch. The output of the script is used to trigger respective pipelines dynamically.

Change the permission of the script to make it executable.

Create a new file .buildkite/pullrequest.yml and add the following step configuration. We use the buildkite-monorepo-diff plugin to run the diff script and automatically upload and trigger the respective pipelines.

Now create the configuration for the merge pipeline by adding the following content in .buildkite/merge.yml.

At this point, we have configured the topmost level pull-request and merge pipelines. Now we need to configure individual pipelines for each service.

Configure pipelines for foo-service first. Create foo-service/.buildkite/pull-request.yml with the following content. When the pull-request pipeline for foo service runs, specify lint and test commands to run. The command option can also trigger other scripts.

Next setup merge pipeline for foo service by adding following content in foo-service/.buildkite/merge.yml.

When the foo-service-merge pipeline runs, here is what happens:

  1. The pipeline runs the sanity check.
  2. Then foo-deploy pipeline is dynamically triggered. We pass the STAGE environment to identify which environment to run the deployment against.
  3. Once the deployment to staging is complete, the pipeline is blocked and the following pipeline is not triggered automatically. The pipeline can be resumed by pressing the “Release to Production” button.
  4. Unblocking the pipeline triggers foo-deploy pipeline again, but this time with production stage.

Finally, add configuration for foo-deploy pipeline by adding foo-service/.buildkite/deploy.yml. In deploy configuration, we trigger a bash script and pass the STAGE variable which was received from foo-service-merge pipeline.

Now, create the deploy script foo-service/bin/deploy and add the following content.

Make the deploy script executable.

The pipeline and steps configuration for foo-serviceis complete. Repeat all the above steps above to configure pipelines for bar service.

Test the overall workflow

We have configured Buildkite, Github and set up the appropriate infrastructure to run the builds. Next, test the entire workflow and see it in action.

To test the workflow, start by creating a new branch and modify some file in foo-service. Push the changes to Github and create a Pull Request.

Pushing changes to Github should trigger the pull-request pipeline in Buildkite, which then triggers the foo-service-pull-request pipeline. Github should report the status in Github checks. Github branch protection can be enabled to require the checks to pass before merging the Pull Request.

Once all the checks have passed in Github, merge the Pull Request. This merge will trigger the merge pipeline in Buildkite.

The changes in foo service are detected, and foo-service-merge pipeline is triggered. The pipeline will eventually be blocked when the foo-service-deploy runs against the staging environment. Unblock the pipeline by manually clicking the Release to Production button to run deployment against production.

Summary

In this post, we set up a continuous integration pipeline for monorepo using Buildkite, Github, and AWS. The pipeline gets our code from the development machine to staging, then to production. The build agents and steps run in autoscaled AWS EC2 instances. We also created a bunch of bash scripts to create easily reproducible versions of this setup. As an improvement to the current design, consider using the buildkite-docker-compose-plugin to isolate the builds in Docker containers.

Follow me on Twitter or check out my projects on Github.

Geek Culture

Proud to geek out. Follow to join our +500K monthly readers.

Medium is an open platform where 170 million readers come to find insightful and dynamic thinking. Here, expert and undiscovered voices alike dive into the heart of any topic and bring new ideas to the surface. Learn more

Follow the writers, publications, and topics that matter to you, and you’ll see them on your homepage and in your inbox. Explore

If you have a story to tell, knowledge to share, or a perspective to offer — welcome home. It’s easy and free to post your thinking on any topic. Write on Medium

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store