Inkscape Plus Fusion-360
Make Your Logo come Alive! 3D Tutorial Episode #01
Hi, this is Pompermaier, let’s Making our Logo Come alive in 3d?
You’ll need:
3 D Inkscape plus Fusion 360.
That’s the vector file:
It is very simple to convert.
First, step download https://inkscape.org/
Then sign up at https://www.autodesk.com/products/fusion-360/students-teachers-educators
After all, follow the steps below
Sorry by this rock tutorial but I’m without any screen recorder
I hope you don`t mind.
Let`s rock!!!
1° STEP — Click on File -> Open
2° STEP — Select an image
3 ° STEP — Just press OK
4 ° STEP — Click on Path -> Trace Bitmap
5° STEP — Click on the image; check “Live Preview” then select edge detection, press OK and close the trace bitmap window
6 ° STEP — Click on File -> Save as, then save your SVG file; it is almost done, now open Autodesk Fusion 360.
7 ° STEP — Click on Insert -> Insert SVG
8° STEP — Click on the folder to open/select the SVG file
9 ° STEP — Select your file
10 ° STEP — Click on a plane on the center of the screen then your file will be loaded to that plane
11 ° STEP — Resize by clicking on the blue option on the center near to the box and arrows
12 ° STEP — Click on Stop Sketch
13° STEP — Click on Modify -> Press Pull
14 ° STEP — Pressed CONTROL click on the edges/parts you want to EXTRUDE selecting them all then finally set the distance you want to extrude and press ENTER
15° STEP 15 — Click on SAVE
16 ° STEP — Save the file
17 ° STEP — Click on File -> Export
18 ° STEP — Select STL type and your location file and press EXPORT, voilà!!!
Enjoy it!
o/
Credits
Márcio Pompermaier
Computer Engineer
