Basic Rally Plus Setup
The Rally Plus and the Rally are really the same product; only the Rally plus has an additional speaker and mic pod.
What’s Included?
Rally
- Camera
- Display Hub
- Table Hub
- Mic Pod
- Speaker
- HDMI Cable
- USB-C to USB-C Cable
- USB-A to USB-B Cable
- CAT6a Cable
- Power Cable
- Remote
Rally Plus
- Camera
- Display Hub
- Table Hub
- Mic Pod (x2 Rally Plus)
- Speaker (x2 Rally Plus)
- HDMI Cable (x2 Rally Plus)
- USB-C to USB-C Cable
- USB-A to USB-B Cable
- CAT6a Cable
- Power Cable (x2 Rally Plus)
- Remote
Rally and Rally Plus does not come with a compute device (Windows, Android, etc.) in the box but can be bundled with the kit if desired.
The basic setup is as follows:
Meeting Computer at the Table
Meeting Computer at the Table
Meeting Computer at the Display
Meeting Computer at the Display
Two hubs connect everything, the Table Hub and the Display Hub.
The Table Hub is designed to be placed at the table in a conference room setup, and the Display Hub is designed to be placed behind or near the display. In addition, there is a single CAT6a cable connecting the two hubs, simplifying the need to run multiple cables across the room.
Note: The CAT6a Ethernet cable is included. Logitech supports customer-supplied CAT6a cables up to 164 ft (50 m)
The setup will approximate the following:
A dedicated PC is used; however, the Rally System could be used in a BYOD (Bring Your Own Device) configuration, which I will discuss in a subsequent article. You will also notice that the above diagram includes the Logitech TAP, which provides simple conference control at the table. I will also talk about TAP in a subsequent article.
