How do I extend the distance between Rally Camera and Display Hub?
In some environments, it might be not possible to place the Display Hub close enough to the Rally camera.
The cable between the two devices can be extended with a Logitech Strong USB cable, a Rally Camera power source, a Rally Camera power splitter and a USB A/C adapter. Because it is a fiberglass cable, it is only available in lengths of 10m, 25m, and 45m. We do not recommend using a longer USB 3 cable.
Note: If you are using Swytch, this will not work if the room computer is located at the table, as the solution will exceed the max number of USB hops if Swytch is used. This method only applies if the computer is located at the display hub.
Rally Camera Power Splitter
- P/N: 993–001903
Rally Camera mount, splitter case and screws
- P/N: 993–001904
Rally Camera Power Adapter
- P/N: 993–001898
LOGI USB-C TO A ADAPTOR
- 956–000028
USB Strong Cable (at the desired length):
Strong USB Cable 45m/147ft
45m, USB 3.2 Gen 2, Extended-length SuperSpeed USB 10 Gbps, USB-C extension cable for tight spaces
- 939–001805
Strong USB Cable 25m/82ft
25m, USB 3.2 Gen 2, Extended-length SuperSpeed USB 10 Gbps, USB-C extension cable for tight spaces
939–001802
Strong USB Cable 10m/32ft
10m, USB 3.2 Gen 2, Extended-length SuperSpeed USB 10 Gbps, USB-C extension cable for tight spaces
- 939–001799
The Logitech Strong USB is aramid-reinforced, plenum-rated, and ECA certified, cables can be hidden in walls, above ceilings, or within standard ¾” conduit. Available in 10m and 25m (32.8 ft and 82 ft) lengths.