Logi Design Advice
Published in

Logi Design Advice

How do I extend the distance between Rally Camera and Display Hub?

In some environments, it might be not possible to place the Display Hub close enough to the Rally camera.

The cable between the two devices can be extended with a Logitech Strong USB cable, a Rally Camera power source, a Rally Camera power splitter and a USB A/C adapter. Because it is a fiberglass cable, it is only available in lengths of 10m, 25m, and 45m. We do not recommend using a longer USB 3 cable.

Note: If you are using Swytch, this will not work if the room computer is located at the table, as the solution will exceed the max number of USB hops if Swytch is used. This method only applies if the computer is located at the display hub.

Rally Camera Power Splitter

  • P/N: 993–001903

Rally Camera mount, splitter case and screws

  • P/N: 993–001904

Rally Camera Power Adapter

  • P/N: 993–001898

LOGI USB-C TO A ADAPTOR

  • 956–000028

USB Strong Cable (at the desired length):

Strong USB Cable 45m/147ft

45m, USB 3.2 Gen 2, Extended-length SuperSpeed USB 10 Gbps, USB-C extension cable for tight spaces

  1. 939–001805

Strong USB Cable 25m/82ft

25m, USB 3.2 Gen 2, Extended-length SuperSpeed USB 10 Gbps, USB-C extension cable for tight spaces

939–001802

Strong USB Cable 10m/32ft

10m, USB 3.2 Gen 2, Extended-length SuperSpeed USB 10 Gbps, USB-C extension cable for tight spaces

  1. 939–001799

The Logitech Strong USB is aramid-reinforced, plenum-rated, and ECA certified, cables can be hidden in walls, above ceilings, or within standard ¾” conduit. Available in 10m and 25m (32.8 ft and 82 ft) lengths.

--

--

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store