Raspberry Pi 4 as your personal Ad Blocker

Chandan Singh
Jun 15 · 9 min read


Get rid of intrusive ads, online tracking, and protect your computer from malware with a simple setup for all the devices on the home network.


Website ads: Its very annoying to see that many websites (mostly free news websites) are increasingly serving intrusive ads. Not only that, the ads are repetitive and sometimes very displeasing.

Mobile/tablet In-app ads: These ads are not limited to the websites. Open a fairly popular local news app and you will see ads. Many free apps are overloaded with the ads. Not just ads, these apps also track and monitor your searches/uses.

Other Issues:

  • Malware websites: Websites serving malware, malicious content
  • Adult content etc


Some approaches to solve these problems:

  1. Browser extensions: Use browser like Brave, or browser extension such as AdBlock — Its easy to setup but it doesnt work for in-app ads
  2. VPN with ad blocker: Connect to a VPN server which blocks all the ads and trackers — You need to connect to a open VPN servers (which is unsafe) or, purchase a regular subscription for VPN providers
  3. Ads-blocker DNS server: Set up a network-wide ads-blocker software on your local wifi network. One time cost but it will bring peace of mind :)

Let’s take a look at the 3rd option. Generally, setting up such a software would mean you need to have a laptop, or a PC which runs ad-blocker software 24x7 to provide uninterrupted service to other devices connected on your wifi network.

What if you don't have a spare PC or laptop?

No worries! Lets take a look at a cheap alternative: Raspberry Pi 4 running network-wide ad-blocker software.

Minimal Setup Requirements

  • A computer connected to your local network
  • Access to your wifi-/ router (in my case it was, Google Nest Wifi)
  • Raspberry Pi 4 (preferably, 2GB or 4GB)
  • USB-C Charger (5.1V / 3.0A DC)
  • Raspberry Pi 4 Case
  • MicroSD Card (preferably, high endurance kind; 16GB or more) or, alternatively, USB Flash Drive

Time needed

1–1.5 hours

Required Skills

  • Install software on a Linux OS
  • Change the settings of your local wifi-router
  • Execute system commands on Terminal/Command-prompt


Step 1: Setup the MicroSD Card or USB Drive

  • Connect the MicrosSD card or USB Flash Drive to a computer
  • Download and install Raspberry Pi Imager to your computer with an SD card reader or USB Flash Drive: Windows | macOS | Ubuntu Linux
  • Open Raspberry Pi Imager
  • Click on “Choose OS”
  • Click on “Rapberry Pi OS”
  • Press Ctrl + Shift + X
  • On Advance Options screen, select “Enable SSH” option. Also, check “Use password authentication”. “Set password for ‘pi’ user” as raspberry. Or, set a password that you can remember. We need the password to connect with the board. Note: we will be accessing Raspberry Pi using SSH (No separate monitor/display required to connect).
  • Check Set Locale Settings. Enter the appropriate Time Zone and Keyboard layout information.
  • Optional: If you want to connect Raspberry Pi with Wifi, enter the SSID and password of your local wifi network
  • Click on the “Save” button
  • Click on “Choose Storage” and select the MicroSD card (or, USB Drive)
  • After selecting the MicroSD card or USB Drive, Click on “Write” button. You may see a warning dialog “All existing data on … will be erased. Are you sure you want to continue?”. Click on the “Yes” button.
  • You may notice a progress-bar. If everything goes well, you should see “Write Successful” dialog. Click on “Continue” button and remove the MicroSD card (or, USB Drive).

Step 2: Connect Raspberry Pi

  • Insert the MicroSD Card containing Raspberry Pi OS image created in previous step. (or, connect USB Drive in USB Port — Only one of these is needed)
  • Connect your router and Raspberry Pi board with Ethernet cable. In case if you doesn’t have a ethernet cable or, if your router doesn’t have empty ethernet port, you can utilize the wifi connection. To utilize wifi, you must have set wifi SSID and password credentials while creating the image.
  • Connect Raspberry Pi with USB-C charger and then connect charger to a power supply. Note: you must not touch the Raspberry Pi board after it is connected to the USB-C charger to avoid electric shock unless you have turned off the power.

Look at your router’s manual, and change the router settings to reserve an IP address for Raspberry Pi. Note down the IP address. In my case, I reserved on my Google Nest Wifi. We need the static/reserved IP address so that other devices can connect to Raspberry Pi using the same IP address. You can find the steps to reserve an IP address for Dlink, Google Wifi, Asus routers at:

Dlink Router: https://eu.dlink.com/uk/en/support/faq/cameras-and-surveillance/mydlink/settings/router/how-do-i-configure-dhcp-reservation-on-my-dir-series-router

Google Nest Wifi: https://support.google.com/googlenest/answer/6274660,

ASUS Router: https://www.asus.com/sg/support/FAQ/114068/

  • Open your computer which should be on the same local network.
  • Mac/Linux: Open terminal application. We will use ssh pi@<ip_address>for example pi@ to connect to the Raspberry Pi. Replace <ip_address> with the IP address that you reserved in previous step. When the connection works, you will see a security/authenticity warning. Type yes to continue. You will only see this warning the first time you connect.
  • Windows: Download and install Putty application. Enter pi@<ip_address> for example pi@ Host Name field. Click “Open” button. Also, click on “Yes” button when Security alert dialog is presented. The default login for Raspberry Pi OS is pi with the password raspberry.

Step 2: Configure Raspberry Pi

  • On first time login to Respberry Pi, you should see “Raspberry Pi configuration tool” with options. In case you don’t see it, simply run command sudo raspi-config after SSH login. When password is asked, enter the password as raspberry
  • You may choose to configure Wireless settings: 1 System Options > S1 Wireless LAN if you want to give wireless access to Raspberry Pi
  • (Optional) You may choose to set a new SSH/VNC password using: 1 System Options > S3 Password if you want to set a new password to Raspberry Pi. Note: After changing to the new password, you must use the same password for SSH/VNC connections. It’s a best practice to change the default password; please do it.
  • Press Esc key a few times to exit from the Raspberry Pi System Configuration.

Step 3: Ads blocker setup on Raspberry Pi

  • Run the following commands from SSH client. You will download AdGuard application and extract it.
sudo apt update
sudo apt full-upgrade
wget https://static.adguard.com/adguardhome/release/AdGuardHome_linux_arm.tar.gztar xvf AdGuardHome_linux_arm.tar.gz
  • Install AdGuardHome
cd ~/AdGuardHome
sudo ./AdGuardHome -s install
  • When you run AdGuard Home for the first time, it will start listening to and prompt you to open it in your browser:
AdGuard Home is available on the following addresses:
Go to
Go to http://X.X.X.X:3000
  • You will go through the initial configuration wizard. Note down the IP address of DNS server. It should be same as the reserved IP address that we have been using so far (for SSH access etc.)
  • Set Username and Password for AdGuard Home application. Note: Don’t use the same username and password that you have used for Raspberry Pi system user pi (for security purposes).
  • At step 4, you may like to configure your router. (You can do it later too)

Open the preferences for your router. Usually, you can access it from your browser via a URL (like or You may be asked to enter the password. If you don’t remember it, you can often find the password on a sticker on the router. Some routers require a specific application, which in that case should be already installed on your computer/phone.

Find the DHCP/DNS settings. Look for the “DNS” letters next to a field which allows two sets of numbers, each broken into four groups of one to three digits.

Enter your AdGuard Home server IP addresses (Raspberry Pi IP address) there.

For Google Nest Wifi router, Open the Google Home app. Tap Wifi > Settings > Advanced Networking > DNS > Choose Custom DNS > Set the IP address of Raspberry Pi

A good reference page to set Custom DNS for various routers is listed here: https://support.opendns.com/hc/en-us/sections/206253667-Individual-Router-Configurations Note: Don’t forget to set the the IP address of Raspberry Pi as a Primary DNS field in your router.

  • At this point you can access the AdGuard application by accessing link http://<raspberry_pi_ip_address>
  • Enter the username and password. Update General Settings and DNS settings.
  • For Malware and adult content blocking, enter the following IP addresses (or, the other such IP addresses listed here)
  • Save it.
  • Configure DNS blocklists. Click on Filters > DNS blocklists. Choose blocklists as per your need.

Note: YouTube, Facebook ads will still be able to escape because they are not easy to block using any software.

My personal setup was:

Google Nest Wifi Router + Raspberry Pi 4 4GB + 32 GB MicroSD Card + Connected with Ethernet and Wireless both + AdGuard Home running + Cron job restarts Raspberry Pi everyday at 2am to keep RPi performant (I will share more on cronjob in other article)

Nerd For Tech

From Confusion to Clarification

Nerd For Tech

NFT is an Educational Media House. Our mission is to bring the invaluable knowledge and experiences of experts from all over the world to the novice. To know more about us, visit https://www.nerdfortech.org/.

Chandan Singh

Written by

Nerd For Tech

NFT is an Educational Media House. Our mission is to bring the invaluable knowledge and experiences of experts from all over the world to the novice. To know more about us, visit https://www.nerdfortech.org/.