Hello Jetson Nano

katopz
katopz
Sep 8, 2019 · 2 min read

I just got new toy! Let’s boot it up shall we?

Image for post
Image for post

Follow this guide…

Or follow me if you choose to install via macOS console.

  1. Write Image to the microSD Card (>32GB) with Jetson Nano Developer Kit SD Card Image
  2. Run below commands step by step,
    📌 First command will tell you the disk number is (for me is “3”) which will need for next step (see the red mark in picture below)
    📌 “jetson-nano-sd-r32.2–2019–07–16.zip” will need to change to match what version you downloaded.
    📌 The last one took me~30 minutes!
diskutil list external | fgrep '/dev/disk'diskutil partitionDisk /dev/disk3 1 GPT "Free Space" "%noformat%" 100%/usr/bin/unzip -p ~/Downloads/jetson-nano-sd-r32.2-2019-07-16.zip | sudo /bin/dd of=/dev/rdisk3 bs=1m
Image for post
Image for post

3. Insert microSD to Jetson Nano, Plug HDMI (to Jetson and monitor of course!) and microUSB …wait for booting…that’s it!

Everything seem to be working just fine! Let’s have fun with it!

Image for post
Image for post

Be right back! Have fun!

Noob Learning

It’s good to be noob so we can learn and have fun ;)

Welcome to a place where words matter. On Medium, smart voices and original ideas take center stage - with no ads in sight. Watch

Follow all the topics you care about, and we’ll deliver the best stories for you to your homepage and inbox. Explore

Get unlimited access to the best stories on Medium — and support writers while you’re at it. Just $5/month. Upgrade

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store